Fujitsu FMW4503TS128A01 manual System Interface Port Connector Pin Assignments

The port replicator/mini-dock connector is not a “hot pluggable” connector. You must shut down or suspend the pen tablet before connecting the port replicator. The system interface port is disabled (all signals de-asserted) when system operation is suspended.

Table 6-6. System Interface Port Connector Pin Assignments

Pin	Signal	Level	Description	Port or Connector
	Name
1	POW1	+16V	DC Power Input	DC-IN
2	POW1
3	POW1
4	POW1
5	POW1
6	POW1
7	LOUTLG	GND	Ground Left	Line Output Audio Jack
8	LOUTL	Analog	Signal Left
9	5VMAIN	+5V	+5 Volt Power Output	Port Replicator
10	5VMAIN
11	5VMAIN
12	5VMAIN
13	FDSEL0#		Drive Select	FDD
14	FMODE#		Density Select
15	FSIDE#		Head Select
16	VGAGND	GND	VGA Ground	CRT
17	VGAGND
18	VSYNC	+5V	Vertical Sync Signal
19	VGAB	Analog	DAC Blue Signal
20	VGAGND	GND	VGA Ground
21	RTSA#	RS-232C	Request to Send	Serial Port
22	DSRA#		Data Set Ready
23	SMI	+3.3V	SMI Input	Port Replicator
24	ID0		Port Replicator ID Input
25	PPERR#	+5V	Error	Parallel Port
26	PAFD#		Autofeed Output
27	PRD6		Port Data 6
28	PRD5		Port Data 5
29	PRD0		Port Data 0

System Interface Port 52