Fujitsu FMW4503TS128A01 manual DC Power Inputs, DC Input Connectors

DC Power Inputs

External DC power can be connected at three locations on the pen tablet:

•DC power connector on the pen tablet

•System interface connector

•DC input positions of the high-usage contacts

A DC power source connected to any of these inputs must provide 3.36 amps at a continuous DC voltage of 16 volts ±10%. Specifications for the DC input connectors on the pen tablet and port replicator are given below.

	Table 7-1. DC Input Connectors
Connector type		EIAJ RC-5320A Type 5
Connector vendor		Hosiden
Vendor part number*		HEC3900-01-010
Pin assignments		Center conductor: +16 VDC ±10%
		Sleeve: ground

* This is the part number for the female DC input connector on the pen tablet and the port replicator.

System Power Hardware 67