Fujitsu FMW4503TS128A01 manual AT Command Set, Start bit Data bit Parity Stop bit

Appendix B

AT Command Set

This Appendix contains a summary of AT commands used by the Stylistic 3500 pen tablet’s modem.

There are several things to note about this set of commands:

•Commands should be entered as ASCII characters.

•Commands should begin with “AT”, with a description of the character after the “AT”.

•The commands are not case-sensitive; upper and lower case characters are treated the same.

•All commands should be followed by the “CR” character stored in “S3”.

•Spaces are counted as characters.

•Command indication can be a selected letter or number message, or it can be no return message by designation.

•Data format is as follows:

Start bit	Data bit	Parity	Stop bit
1	7	even	1
1	7	odd	1
1	7	none	2
1	8	none	1

Note: Baud rate and data format are detected by the “AT” character.

79