Fujitsu FMW4503TS128A01 manual Port Replicator/Mini-Dock Specifications, Pcmcia

Port Replicator/Mini-Dock Specifications

The Stylistic 3500 port replicator and mini-dock are designed to provide optimal support for your pen tablet. Specifications for interfaces on the Stylistic 3500 port replicator and mini-dock are given in Table

5-11.Note that these interfaces duplicate corresponding ports on the pen tablet. For details on peripheral interfaces provided by the port replicator and mini-dock, refer to Chapter 6 of this manual.

Note: The connectors and ports on the port replicator and mini-dock are identical with one exception: the mini-dock has a PCMCIA slot, but the port replicator does not.

Table 5-11. Stylistic 3500 Port Replicator/Mini-Dock Specifications

Feature	Specification	Comments
DC power input	+ tip / - sleeve
	16 VDC ±10%, 3.36 A
Keyboard Port	6-pin PS/2-style	Supports most PS/2-style keyboards.
Mouse Port	6-pin PS/2-style
Video Port	Standard 15-pin video connector	System supports simultaneous operation of
		external monitor with LCD.
Serial Port A	Male 9-pin D connector	NS 16C550-compatible, fully functional
		RS-232C serial port.
LAN Port	Standard RJ-45 port	See “Internal LAN/Modem Specifications” on
		page 44 for more information. Note that this
		portion of the LAN/Modem device is
		accessible only via the port replicator or
		mini-dock.
Floppy Disk Drive	26-pin connector for use with Fujitsu floppy
Port	disk drives.
Line Output Jack	3.5 mm mini stereo jack	Using the line output jack does not disable
		any other audio features on the pen tablet or
		port replicator. (The line output jack is not
		disabled when other audio jacks are used.)
Universal Serial Bus	USB Series A receptacle
Port
Parallel Port	25-pin D connector, female	Output only, bidirectional, and ECP
		operational modes are supported.
PCMCIA	Standard 68-pin PCMCIA connector	Available on mini-dock only. Will support one
		Type III or two Type II CardBus cards.

Port Replicator/Mini-Dock Specifications 46