Fujitsu FMW4503TS128A01 manual Primary Master Submenu Options

Primary Master Submenu Options

Options and settings for the Primary Master Submenu are given in Table 3-2.

Table 3-2. BIOS Setup Primary Master Configuration Options

Option	Settings	Description
Type	Auto	IDE hard disk drive configuration method.
	None	Select [Auto] to load configuration parameters from
	Hard Disk	the hard disk drive automatically. Selecting [None]
		disables the hard drive. Selecting [Hard Disk] allows
		you to manually enter parameter values for the
		remaining options listed in this table.
Cylinders*	0 to 65535	Number of cylinders.
Heads*	1 to 16	Number of read/write heads.
Sectors*	0 to 63	Number of sectors per track.
Maximum Capacity	xxxxMB	Display only.
Multi-Sector Transfers*	Disabled	Number of sectors used in multisector transfers.
	2 Sectors	You can cycle through the settings for this option to
	4 Sectors	select values up to the maximum 128 sectors
	8 Sectors	allowable for the hard disk drive. (Selecting the
	16 Sectors	maximum, or values larger than the default may
	32 Sectors	degrade performance.)
	64 Sectors
	128 Sectors
LBA Mode Control*	Disabled	Logical Block Address (LBA) mode control. Selecting
	Enabled	[Enabled] causes logical block addressing to be
		used. Selecting [Disabled] causes cylinder, head,
		and sector addressing to be used.
PIO Transfer Mode*	Standard	Determines the method for data transfers to and from
	Fast PIO 1	the hard disk drive.
	Fast PIO 2	(Choosing [Auto] for the HDD Configuration option
	Fast PIO 3	selects the optimum setting for this option.)
	Fast PIO 4
DMA Transfer Mode*	Disabled	Determines the mode used for DMA transfers to/from
	Multiword DMA 1	the drive. (Choosing [Auto] for the HDD
	Multiword DMA 2	Configuration option selects the optimum setting for
	Ultra DMA 0	this option.)
	Ultra DMA 1
	Ultra DMA 2

* These values can be changed when Hard Disk is selected.

BIOS Setup 9