Fujitsu FMW4503TS128A01 Delete Option, Info Option, Phdisk /DELETE Option, Phdisk /INFO Option

DELETE Option

When DELETE is specified, the pointers and data in the specified save-to-disk partition or file are deleted. Use DELETE when bad data is displayed after a Resume From Disk operation.

/DELETE Option Syntax

Table 3-23lists valid examples of the PHDISK /DELETE option.

Table 3-23. PHDISK /DELETE Option

Command	Description
PHDISK /DELETE /FILE	Delete save-to-disk file.
(or PHDISK /D /F)
PHDISK /DELETE /PARTITION	Deletes all data in the save-to-disk partition and
(or PHDISK /D /P)	renders disk space occupied by the save-to-disk
	partition unusable. (You must reformat the entire hard
	disk to use the hard disk space occupied by the
	deleted partition.)

INFO Option

The /INFO option displays data about the save-to-disk partition or file.

/INFO Option Syntax

Table 3-24lists valid examples of the PHDISK /INFO option.

	Table 3-24. PHDISK /INFO Option
Command		Description
PHDISK /INFO /FILE		Displays the size (in kilobytes) of the
(or PHDISK /I /F)		save-to-disk file size.
PHDISK /INFO /PARTITION		Displays the PHDISK /INFO screen.
(or PHDISK /I /P)

An example of the /INFO screen when a save-to-disk partition exists is shown below:

PHDISK 3.2.20 -- Phoenix NoteBIOS 4.0 (TM) Save to Disk Preparation Utility Copyright (c) Phoenix Technologies Ltd. 1995-99. All rights Reserved. Copyright (c) FUJITSU LIMITED. 1998-99

Save to Disk partition information:

Partition starts at sector xxxxx (head xx, cylinder xx, sector xx)

Partition size: xxxx KBytes total

Current System Status:

You currently need a Save to Disk area of xxxx KBytes. PhDisk will

also require additional overhead and will automatically calculate the

actual required space.

PHDISK Hard Disk Preparation Utility 31