Zebra Technologies Z4M manual Print Method, Print Width

Display Shows	Action/Explanation
	Selecting Print Method Press the INCREMENT (+) key for the next value;
	press the DECREMENT (-) key for the previous value.
	Default: Thermal transfer
	Selections: Thermal transfer, direct thermal
PRINT METHOD	The print method parameter tells the printer the method of printing you wish
	to use: direct thermal (no ribbon) or thermal transfer (using thermal transfer
	media and ribbon).
	NOTE: Selecting direct thermal when using thermal transfer media and
	ribbon creates a warning condition, but printing will continue.
	Setting Print Width Press the INCREMENT (+) key to increase the value,
	press the DECREMENT (-) key to decrease the value. To change the unit of
	measurement, press the DECREMENT (-) key until the unit of measurement is
	active, then press the INCREMENT (+) key to toggle to a different unit of
PRINT WIDTH	measure (inches, mm, or dots).
	Default:, Range: The default and range of acceptable values may vary
	depending on what printer you have. Refer to “Printing Specifications” on
	page 80 for further information about the ranges available for your model.
	Print width determines the printable area across the width of the label.

42 Zebra Z4M Printer User’s Guide