PAUSE Key Self Test
This self test can be used to provide the test labels required when making adjustments to the printer’s mechanical assemblies. See the sample printout in Figure 30.
1.Turn off the printer.
2. | Press and hold the PAUSE | Figure 30 |
| ||
| key while turning on the |
|
| power. |
|
3. | Release the key after the |
|
| DATA light turns off |
|
| (approximately five |
|
| seconds). |
|
The initial self test prints 15 labels at 2"/51 mm per second, then automatically pauses the printer. Each time the PAUSE key is pressed, an additional 15 labels print.
While the printer is paused, pressing the CANCEL key alters the self test. Now each time the PAUSE key is pressed the printer prints 15 labels at 6”/152 mm per second.
While the printer is paused, pressing the CANCEL key again alters the self test again. Each time the PAUSE key is pressed the printer prints 50 labels at 2”/51 mm per second.
While the printer is paused, pressing the CANCEL key again alters the self test a third time. Now each time the PAUSE key is pressed the printer prints 50 labels at 6”/152 mm per second.
While the printer is paused, pressing the CANCEL key again alters the self test a fourth time. Each time the PAUSE key is pressed the printer prints 15 labels at the printer’s maximum speed.
To exit this self test at any time, press and hold the CANCEL key.
Zebra Z4M Printer User’s Guide | 75 |