Zebra Technologies Z4M IP Resolution, Default Dynamic, IP Protocols, Default All, IP Address

Page 61

Display Shows

 

 

Action/Explanation

 

IP Resolution

 

Press the INCREMENT (+) or DECREMENT (-) key to display

 

other choices.

 

 

 

Default: Dynamic

 

IP RESOLUTION*

Selections: Dynamic, permanent

 

Depending on the selection, allows either the user (”permanent”) or the server

 

(”dynamic”) to select the IP address. For more information, refer to ZebraNet

 

Networking: PrintServer II Installation and User’s Guide.

 

 

 

 

IP Protocols

Press the INCREMENT (+) or DECREMENT (-) key to display

 

other choices.

 

 

 

Default: All

 

 

IP PROTOCOLS*

Selections: All, gleaning only, RARP, BOOTP, DHCP, DHCP/BOOTP

If “dynamic” was chosen in the previous parameter, this selection determines

 

 

the method(s) by which the PrintServer II will receive the IP address from the

 

server. For more information, refer to ZebraNet Networking: PrintServer II

 

Installation and User’s Guide.

 

 

 

 

IP Address

Press the DECREMENT (-) key to move to the next digit

 

position, press the INCREMENT (+) key to increase the value of the digit.

IP ADDRESS*

This parameter allows you to select the IP address if “permanent” was chosen

in “IP RESOLUTION.” (If “dynamic” was chosen, the user cannot select the

 

 

address.) For more information, refer to ZebraNet Networking: PrintServer II

 

Installation and User’s Guide.

 

 

 

 

 

Subnet Mask

 

Press the INCREMENT (+) or DECREMENT (-) key to display

 

other choices.

 

 

 

Default: Permanent (user must set)

SUBNET MASK*

Selections: Dynamic (user may set, but server can assign), permanent

 

This parameter selects the part of the IP address that is considered to be part

 

of the local network. It can be reached without going through the default

 

gateway.

 

 

 

 

 

 

Default Gateway

Press the DECREMENT (-) key to move to the next digit

DEFAULT

position, press the INCREMENT (+) key to increase the value of the digit.

 

 

 

GATEWAY*

This parameter allows you to select the IP address that the network traffic is

 

routed through if the destination address is not part of the local network.

 

 

 

 

* Option required

Zebra Z4M Printer User’s Guide

53

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Customer order # 77965L Manufacturer 77965LB Rev Zebra Z4M Printer User’s Guide Zebra Z4M Printer Zebra Z4M Printer User’s Guide Table of Contents Establishing Communication Configuration Index Hello WelcomeUnpacking and Inspection Reporting Damage Media and Ribbon RequirementsStorage Printer Power Printer Overview Purpose Calibrating the PrinterNon-Continuous Web Media Types of MediaContinuous Media Non-Continuous Black Mark MediaChoosing the Print Mode Loading the Media Reflective Sensor Positioning the Media SensorAdjusting the Reflective Sensor Transmissive Sensor Loading the RibbonAuto Calibration Operator Controls Power SwitchFront Panel Configuring the Printer Printing a Test Label Configuring the Software of Printer DriverEstablishing Communication Data SpecificationsSystem Considerations InterfacesCabling Requirements Front Panel Printer BasicsFront Panel Display Key Function Front Panel KeysLight Status Indication Front Panel LightsRoll Media Loading Tear-Off ModeTransmissive Sensor Printhead Assembly Dancer Cutter Mode Printhead Assembly Ribbon Sensor Cutter Value Peel-Off Mode Media supply guide Power Peel-Off Mode Backing Removal Power Rewind Mode Media Removal Fanfold Media Loading Dancer Media Ribbon Media guide Loading the Ribbon Ribbon LoadingZebra Z4M Printer User’s Guide Ribbon Removal Entering the Setup Mode ConfigurationChanging Password-Protected Parameters Leaving the Setup Mode Setting Print Parameters Configuration and Calibration SequenceDefault +10 Default +0Default Web Default Tear-offSelections Web, mark Sensor SelectPrint Width Listing Printer Information Initialize Card Initialize Memory CardInitialize Flash Memory Init Flash MEMSensor Profile Media and Ribbon Sensor CalibrationManual CalibrationSetting Parallel Communications Setting Communication ParametersDefault Parallel Setting BaudDefault Even Setting ParitySetting Host Handshake Default XON/XOFFSetting Communications Mode Setting Network IDNetwork ID CommunicationsControl Prefix Character Selecting Prefix and Delimiter CharactersRange 00-FF Range 00 FFDefault ZPL Selections ZPL II, ZPL Selecting ZPL ModePower-Up and Head Close Parameters Media Power-Up Default FeedBackfeed Sequence Label Positioning ParametersBackfeed Label TOPPassword Level LCD AdjustWEB S Media S Ribbon SDefault Dynamic IP ResolutionDefault All Default GatewayDefault Permanent Default EnglishSave Settings LanguageCleaning Routine Care and AdjustmentsCleaning the Interior Cleaning the ExteriorCleaning the Printhead and Platen Roller Cleaning the Sensors Cleaning the Power Peel-Off Module Cleaning the Value Peel-Off Module Cleaning the Cutter Module Lubrication Printhead Pressure Adjustment Pressure adjustment dials Power Rewind Media Alignment Adjustment Fuse Replacement LCD Error Conditions and Warnings TroubleshootingError condition Ribbon OUT Error condition Paper OUTError condition Ribbon Error condition Head OpenGeneral print quality issues Print Quality ProblemsWrinkled ribbon Gray lines on blank labels with no consistent patternCalibration Communications ProblemsZebra Z4M Printer User’s Guide Power-On Self Test Printer DiagnosticsAdditional Printer Self Tests Cancel Key Self Test Pause Key Self Test Feed Key Self Test Communications Diagnostics Test Loading Factory DefaultsZebra Z4M Printer User’s Guide General Specifications SpecificationsRibbon Specifications Printing SpecificationsOptions Media SpecificationsBar Codes Zebra Programming Language ZPLPower Line Cord Specifications AC Power CordZebra Z4M Printer User’s Guide Printer Interface Technical Information AppendixSerial Data Communications RS-232 Interface Hardware Control Signal Descriptions RS-485 Interface Parallel Interface Parallel Data CommunicationsZebra Z4M Printer User’s Guide Index Zebra Z4M Printer User’s Guide Zebra Z4M Printer User’s Guide Zebra Z4M Printer User’s Guide

Z4M specifications

Zebra Technologies has long been a prominent name in the field of printing solutions, and the Z4M label printer stands out as a robust device well-suited for various industrial applications. Known for its reliability and high-performance capabilities, the Z4M is designed to meet the demanding needs of environments such as manufacturing, warehousing, and retail.

One of the key features of the Zebra Z4M is its thermal transfer printing technology. This method provides superior print quality for barcodes, text, and graphics, ensuring that critical information is clearly legible. The printer is capable of producing labels at a speed of up to 6 inches per second, increasing efficiency and productivity in busy settings. With a resolution of up to 203 dpi, it offers crisp, clear printing that is essential for accurate inventory management and tracking.

The Z4M printer is designed with versatility in mind. It supports a wide range of media types including paper, synthetic, and tags, enabling users to print labels of various sizes and materials. The maximum print width of 4 inches allows for the creation of large labels that can accommodate more information, which is particularly useful for shipping and logistics applications.

Connectivity options play a crucial role in modern printing solutions, and the Z4M does not disappoint. It comes equipped with standard parallel, serial, and USB interfaces, and offers optional Ethernet and Wi-Fi capabilities. This allows for seamless integration into existing systems and ensures that printers can be easily networked for shared use.

Built for durability, the Z4M features a sturdy metal construction that can withstand the rigors of industrial environments. Its compact design makes it easy to place in various locations, while the user-friendly interface simplifies setup and operation. The LCD screen provides clear status updates, and the printer's intuitive controls make it accessible for operators of all skill levels.

Another notable characteristic of the Z4M is its advanced software compatibility. It supports Zebra's programming languages including ZPL and EPL, making it customizable for diverse applications. This flexibility ensures that businesses can maximize the printer's functionality according to their specific needs.

Overall, the Zebra Technologies Z4M is a versatile and reliable label printer that combines quality, speed, and durability, making it an excellent choice for businesses looking to enhance their labeling processes.
Top Page Image Contents