Zebra Technologies Z4M Label Positioning Parameters, Backfeed Sequence, Label TOP, Left Position

Page 59

Label Positioning Parameters

 

Display Shows

 

Action/Explanation

 

 

 

Backfeed Sequence

Press the INCREMENT (+) or DECREMENT (-) key to

 

 

 

display other choices.

 

 

 

 

Default: Default (90%)

 

 

 

 

Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%, 60%, 70%,

 

 

 

80%, off

 

 

 

 

This parameter establishes when and how much label backfeed occurs after a

 

 

 

label is removed or cut in the peel-off or cutter modes. It has no effect in

 

 

BACKFEED

rewind or tear-off modes. This parameter setting can be superseded by the

 

 

~JS instruction when received as part of a label format (refer to the

 

 

 

 

 

 

ZPL II Programming Guide Volume I).

 

 

 

NOTE: The difference between the value entered and 100% establishes how

 

 

 

much backfeed occurs before the next label is printed. For example,

 

 

 

a value of 40 means that 40% of the backfeed takes place after the

 

 

 

label is removed or cut. The remaining 60% takes place before the

 

 

 

next label is printed. A value of “before” means that all backfeed will

 

 

 

take place before the next label is printed.

 

 

 

 

 

 

 

Adjusting Label Top Position Press the INCREMENT (+) key to increase the

 

 

 

value, press the DECREMENT (-) key to decrease the value. The displayed

 

 

 

value represents dots.

 

 

 

 

Default: +0

 

 

 

LABEL TOP

Range: -120 to +120 dot rows

 

 

 

The label top position adjusts the print position vertically on the label. Positive

 

 

 

numbers adjust the label top position further down the label (away from the

 

 

 

printhead), negative numbers adjust the position up the label (toward the

 

 

 

printhead).

 

 

 

 

 

 

 

 

 

Adjusting Left Position

Press the DECREMENT (-) key to move to the next

 

 

 

position, press the INCREMENT (+) key to change between + and - and to

 

 

 

increase the value of the digit. The displayed value represents dots.

 

 

 

Default: 0000

 

 

 

 

Range: -9999 to +9999

 

 

 

LEFT POSITION

NOTE: For a negative value, enter the value before changing to the minus

 

 

 

sign.

 

 

 

 

This parameter establishes how far from the left edge of a label the format will

 

 

 

begin to print by adjusting horizontal positioning on the label. Positive

 

 

 

numbers adjust the printing to the left by the number of dots selected,

 

 

 

negative numbers shift printing to the right.

 

 

 

 

 

 

Zebra Z4M Printer User’s Guide

51

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Customer order # 77965L Manufacturer 77965LB Rev Zebra Z4M Printer User’s Guide Zebra Z4M Printer Zebra Z4M Printer User’s Guide Table of Contents Establishing Communication Configuration Index Unpacking and Inspection WelcomeHello Storage Media and Ribbon RequirementsReporting Damage Printer Power Printer Overview Purpose Calibrating the PrinterNon-Continuous Web Media Types of MediaContinuous Media Non-Continuous Black Mark MediaChoosing the Print Mode Loading the Media Reflective Sensor Positioning the Media SensorAdjusting the Reflective Sensor Transmissive Sensor Loading the RibbonAuto Calibration Front Panel Power SwitchOperator Controls Configuring the Printer Printing a Test Label Configuring the Software of Printer DriverInterfaces Data SpecificationsEstablishing Communication System ConsiderationsCabling Requirements Front Panel Display Printer BasicsFront Panel Key Function Front Panel KeysLight Status Indication Front Panel LightsRoll Media Loading Tear-Off ModeTransmissive Sensor Printhead Assembly Dancer Cutter Mode Printhead Assembly Ribbon Sensor Cutter Value Peel-Off Mode Media supply guide Power Peel-Off Mode Backing Removal Power Rewind Mode Media Removal Fanfold Media Loading Dancer Media Ribbon Media guide Loading the Ribbon Ribbon LoadingZebra Z4M Printer User’s Guide Ribbon Removal Entering the Setup Mode ConfigurationChanging Password-Protected Parameters Leaving the Setup Mode Default +0 Configuration and Calibration SequenceSetting Print Parameters Default +10Sensor Select Default Tear-offDefault Web Selections Web, markPrint Width Listing Printer Information Init Flash MEM Initialize Memory CardInitialize Card Initialize Flash MemoryCalibration Media and Ribbon Sensor CalibrationSensor Profile ManualSetting Baud Setting Communication ParametersSetting Parallel Communications Default ParallelDefault XON/XOFF Setting ParityDefault Even Setting Host HandshakeCommunications Setting Network IDSetting Communications Mode Network IDRange 00 FF Selecting Prefix and Delimiter CharactersControl Prefix Character Range 00-FFDefault Feed Selecting ZPL ModeDefault ZPL Selections ZPL II, ZPL Power-Up and Head Close Parameters Media Power-UpLabel TOP Label Positioning ParametersBackfeed Sequence BackfeedRibbon S LCD AdjustPassword Level WEB S Media SDefault Gateway IP ResolutionDefault Dynamic Default AllLanguage Default EnglishDefault Permanent Save SettingsCleaning Routine Care and AdjustmentsCleaning the Printhead and Platen Roller Cleaning the ExteriorCleaning the Interior Cleaning the Sensors Cleaning the Power Peel-Off Module Cleaning the Value Peel-Off Module Cleaning the Cutter Module Lubrication Printhead Pressure Adjustment Pressure adjustment dials Power Rewind Media Alignment Adjustment Fuse Replacement Error condition Paper OUT TroubleshootingLCD Error Conditions and Warnings Error condition Ribbon OUTError condition Ribbon Error condition Head OpenGeneral print quality issues Print Quality ProblemsWrinkled ribbon Gray lines on blank labels with no consistent patternCalibration Communications ProblemsZebra Z4M Printer User’s Guide Additional Printer Self Tests Printer DiagnosticsPower-On Self Test Cancel Key Self Test Pause Key Self Test Feed Key Self Test Communications Diagnostics Test Loading Factory DefaultsZebra Z4M Printer User’s Guide General Specifications SpecificationsRibbon Specifications Printing SpecificationsOptions Media SpecificationsBar Codes Zebra Programming Language ZPLPower Line Cord Specifications AC Power CordZebra Z4M Printer User’s Guide Serial Data Communications AppendixPrinter Interface Technical Information RS-232 Interface Hardware Control Signal Descriptions RS-485 Interface Parallel Interface Parallel Data CommunicationsZebra Z4M Printer User’s Guide Index Zebra Z4M Printer User’s Guide Zebra Z4M Printer User’s Guide Zebra Z4M Printer User’s Guide

Z4M specifications

Zebra Technologies has long been a prominent name in the field of printing solutions, and the Z4M label printer stands out as a robust device well-suited for various industrial applications. Known for its reliability and high-performance capabilities, the Z4M is designed to meet the demanding needs of environments such as manufacturing, warehousing, and retail.

One of the key features of the Zebra Z4M is its thermal transfer printing technology. This method provides superior print quality for barcodes, text, and graphics, ensuring that critical information is clearly legible. The printer is capable of producing labels at a speed of up to 6 inches per second, increasing efficiency and productivity in busy settings. With a resolution of up to 203 dpi, it offers crisp, clear printing that is essential for accurate inventory management and tracking.

The Z4M printer is designed with versatility in mind. It supports a wide range of media types including paper, synthetic, and tags, enabling users to print labels of various sizes and materials. The maximum print width of 4 inches allows for the creation of large labels that can accommodate more information, which is particularly useful for shipping and logistics applications.

Connectivity options play a crucial role in modern printing solutions, and the Z4M does not disappoint. It comes equipped with standard parallel, serial, and USB interfaces, and offers optional Ethernet and Wi-Fi capabilities. This allows for seamless integration into existing systems and ensures that printers can be easily networked for shared use.

Built for durability, the Z4M features a sturdy metal construction that can withstand the rigors of industrial environments. Its compact design makes it easy to place in various locations, while the user-friendly interface simplifies setup and operation. The LCD screen provides clear status updates, and the printer's intuitive controls make it accessible for operators of all skill levels.

Another notable characteristic of the Z4M is its advanced software compatibility. It supports Zebra's programming languages including ZPL and EPL, making it customizable for diverse applications. This flexibility ensures that businesses can maximize the printer's functionality according to their specific needs.

Overall, the Zebra Technologies Z4M is a versatile and reliable label printer that combines quality, speed, and durability, making it an excellent choice for businesses looking to enhance their labeling processes.
Top Page Image Contents