Zebra Technologies Z4M manual Printer Power

Page 11

Printer Power

The power supply in the printer automatically detects the applied line voltage and works in the 90 to 265 VAC range.

WARNING!!! For personnel and equipment safety, always use a three-prong plug with an earth ground connection.

NOTE: Depending on how your printer was ordered, a power cord may or may not be included. If one is not included, or if the one included is not suitable for your requirements, refer to “Power Line Cord Specifications” on page 83.

Refer to Figure 1.

The AC power cord connector must be plugged into the mating connector at the rear of the printer.

Make sure that the POWER switch is in the “off” position before connecting the power cord to an electrical outlet.

AC

power

switch

Connector

Figure 1

Zebra Z4M Printer User’s Guide

3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Customer order # 77965L Manufacturer 77965LB Rev Zebra Z4M Printer User’s Guide Zebra Z4M Printer Zebra Z4M Printer User’s Guide Table of Contents Establishing Communication Configuration Index Unpacking and Inspection WelcomeHello Storage Media and Ribbon RequirementsReporting Damage Printer Power Printer Overview Purpose Calibrating the PrinterNon-Continuous Web Media Types of MediaContinuous Media Non-Continuous Black Mark MediaChoosing the Print Mode Loading the Media Reflective Sensor Positioning the Media SensorAdjusting the Reflective Sensor Transmissive Sensor Loading the RibbonAuto Calibration Front Panel Power SwitchOperator Controls Configuring the Printer Printing a Test Label Configuring the Software of Printer DriverInterfaces Data SpecificationsEstablishing Communication System ConsiderationsCabling Requirements Front Panel Display Printer BasicsFront Panel Key Function Front Panel KeysLight Status Indication Front Panel LightsRoll Media Loading Tear-Off ModeTransmissive Sensor Printhead Assembly Dancer Cutter Mode Printhead Assembly Ribbon Sensor Cutter Value Peel-Off Mode Media supply guide Power Peel-Off Mode Backing Removal Power Rewind Mode Media Removal Fanfold Media Loading Dancer Media Ribbon Media guide Loading the Ribbon Ribbon LoadingZebra Z4M Printer User’s Guide Ribbon Removal Entering the Setup Mode ConfigurationChanging Password-Protected Parameters Leaving the Setup Mode Default +0 Configuration and Calibration SequenceSetting Print Parameters Default +10Sensor Select Default Tear-offDefault Web Selections Web, markPrint Width Listing Printer Information Init Flash MEM Initialize Memory CardInitialize Card Initialize Flash MemoryCalibration Media and Ribbon Sensor CalibrationSensor Profile ManualSetting Baud Setting Communication ParametersSetting Parallel Communications Default ParallelDefault XON/XOFF Setting ParityDefault Even Setting Host HandshakeCommunications Setting Network IDSetting Communications Mode Network IDRange 00 FF Selecting Prefix and Delimiter CharactersControl Prefix Character Range 00-FFDefault Feed Selecting ZPL ModeDefault ZPL Selections ZPL II, ZPL Power-Up and Head Close Parameters Media Power-UpLabel TOP Label Positioning ParametersBackfeed Sequence BackfeedRibbon S LCD AdjustPassword Level WEB S Media SDefault Gateway IP ResolutionDefault Dynamic Default AllLanguage Default EnglishDefault Permanent Save SettingsCleaning Routine Care and AdjustmentsCleaning the Printhead and Platen Roller Cleaning the ExteriorCleaning the Interior Cleaning the Sensors Cleaning the Power Peel-Off Module Cleaning the Value Peel-Off Module Cleaning the Cutter Module Lubrication Printhead Pressure Adjustment Pressure adjustment dials Power Rewind Media Alignment Adjustment Fuse Replacement Error condition Paper OUT TroubleshootingLCD Error Conditions and Warnings Error condition Ribbon OUTError condition Ribbon Error condition Head OpenGeneral print quality issues Print Quality ProblemsWrinkled ribbon Gray lines on blank labels with no consistent patternCalibration Communications ProblemsZebra Z4M Printer User’s Guide Additional Printer Self Tests Printer DiagnosticsPower-On Self Test Cancel Key Self Test Pause Key Self Test Feed Key Self Test Communications Diagnostics Test Loading Factory DefaultsZebra Z4M Printer User’s Guide General Specifications SpecificationsRibbon Specifications Printing SpecificationsOptions Media SpecificationsBar Codes Zebra Programming Language ZPLPower Line Cord Specifications AC Power CordZebra Z4M Printer User’s Guide Serial Data Communications AppendixPrinter Interface Technical Information RS-232 Interface Hardware Control Signal Descriptions RS-485 Interface Parallel Interface Parallel Data CommunicationsZebra Z4M Printer User’s Guide Index Zebra Z4M Printer User’s Guide Zebra Z4M Printer User’s Guide Zebra Z4M Printer User’s Guide

Z4M specifications

Zebra Technologies has long been a prominent name in the field of printing solutions, and the Z4M label printer stands out as a robust device well-suited for various industrial applications. Known for its reliability and high-performance capabilities, the Z4M is designed to meet the demanding needs of environments such as manufacturing, warehousing, and retail.

One of the key features of the Zebra Z4M is its thermal transfer printing technology. This method provides superior print quality for barcodes, text, and graphics, ensuring that critical information is clearly legible. The printer is capable of producing labels at a speed of up to 6 inches per second, increasing efficiency and productivity in busy settings. With a resolution of up to 203 dpi, it offers crisp, clear printing that is essential for accurate inventory management and tracking.

The Z4M printer is designed with versatility in mind. It supports a wide range of media types including paper, synthetic, and tags, enabling users to print labels of various sizes and materials. The maximum print width of 4 inches allows for the creation of large labels that can accommodate more information, which is particularly useful for shipping and logistics applications.

Connectivity options play a crucial role in modern printing solutions, and the Z4M does not disappoint. It comes equipped with standard parallel, serial, and USB interfaces, and offers optional Ethernet and Wi-Fi capabilities. This allows for seamless integration into existing systems and ensures that printers can be easily networked for shared use.

Built for durability, the Z4M features a sturdy metal construction that can withstand the rigors of industrial environments. Its compact design makes it easy to place in various locations, while the user-friendly interface simplifies setup and operation. The LCD screen provides clear status updates, and the printer's intuitive controls make it accessible for operators of all skill levels.

Another notable characteristic of the Z4M is its advanced software compatibility. It supports Zebra's programming languages including ZPL and EPL, making it customizable for diverse applications. This flexibility ensures that businesses can maximize the printer's functionality according to their specific needs.

Overall, the Zebra Technologies Z4M is a versatile and reliable label printer that combines quality, speed, and durability, making it an excellent choice for businesses looking to enhance their labeling processes.
Top Page Image Contents