munications cables offered with the RW series.)
Plug the connector into the combination port and ensure it’s locking device has clicked into position. Then press the Locking Plug into the opening around the connector, aligning its locking features with the cutouts on the printer case. Turn the Locking Plug clockwise
The other end of the cable must be plugged into the host terminal as shown in Figure 13, or to a serial port on a comput- er as shown in Figure 14. Communications between the termi-
Figure 13: Communications to a Terminal
Printer Communications Port
Communications
Cable
Part number varies. Refer to
Appendix A
Figure 14: Communications to a PC
USB
Communications
Cable
Refer to Appendix A for part number
RS232
Communications Cable
Refer to Appendix A for part number
29