Zebra Technologies RW 220, RW 420 manual Flashing or icon

Page 60

9.Flashing or icon :

•Check that media is loaded.

•Ensure Media Cover is properly closed and latched.

10.Skips labels (only when using label stock):

•Check media for top of form sense mark or label gap.

•Check that the maximum print field has not been exceeded on label.

•Ensure bar or gap sensor is not blocked or malfunctioning.

11.Communication Error:

•Check media is loaded.

•Ensure Media Cover is properly closed and latched and error indicators are off.

•Check baud rate.

•Replace cable to terminal.

12.Label Jam:

•Open media cover.

•Apply generous amount of alcohol to printer in area of jammed label.

13.Blank LCD Screen

•No application loaded or application corrupted: reload program.

14.Magnetic Strip Card or Smart Card Won’t Read

•Ensure the “RDR” text is displayed, indicating card reader is enabled. (Refer to the Operator Controls section.)

•Ensure card is inserted with the magnetic stripe or microchip facing in the correct direction.

•Check card for excessive wear or damage to either the magnetic strip or the microchip.

15.Battery Pack Is Hard to Insert

•The battery packs for the RW and QL series printers are similar in size and shape, but are not interchangeable. Verify you are using the correct battery pack. The battery pack part number for the RW 420 is AK17463-005.

The battery pack part number for the RW 220 is AK18026-002.

•Verify that the shrink wrapping and the warning card protecting the battery contacts have been removed.

60

RW Series User Guide

Image 60

Contents UMAN-RWS-010 Rev. B May Contents Extending Battery Life General Cleaning Instructions Magnetic Stripe Reader Smart Card ReaderRW Series User Guide Proprietary Statement Product ImprovementsAgency Approvals and Regulatory Information Document Conventions RW 420 Overview RW 220 Overview Introduction to the RW Series Unpacking and InspectionReporting Damage Battery Safety Charger SafetyGetting Ready to Print Installing the RW 420 Battery Installing RW Series Batteries LI72 ChargerLI72 Charger Charger JackLI72 Single Charger Types Indicator Charger Charger Status Function Battery Contact Problem Green Solid Fully ChargedCharging Short Circuit of Output TerminalsPower Supply Power IndicatorModel UCLI72-4 Quad Charger AmberBattery 80% Charged Hrs 25 Hrs Battery Fully Charged Charging process per the following tableLoading Media Procedure Loading the MediaMedia Compartment Media SupportLoading Media From An Internal Supply Media RollLoading Media From An External Supply Media SpacerBA16625-1 Closing the Media Cover Operator Controls Control PanelProgrammable LCD Settings Extended LCD Functions1 Display Functions Not Accessible from the Keypad1 Printing a Configuration Label Verify the Printer Is WorkingConnecting the Printer Cable CommunicationsSerial RS232C and USB Combination Port USB Port RS232/USB PortPrinter Communications Port Cable Communications CableRS232 Communications Cable Wireless Communications Wireless Communications with BluetoothBluetooth Networking Overview Wireless Local Area Network Overview Setting Up the Software Bluetooth RW -ZBR3 Radio RW 220 and RW Radio Regulatory InformationZebra Bluetooth Radio 2.0 RW-ZBR4 RW 220 and RW Compact Flash 802.11b Radio Module Europe EU Declaration of Conformity Zebra Value Radio, 802.11b Europe EU Declaration of Conformity Wlan Module Using 802.11b/g Radio Industry Canada IC Warning004 Europe EU Declaration of Conformity 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다 Compact Flash 802.11b and Bluetooth Co-located Radio Modules RW Series User Guide Rdr indicates MSR is enabled Card Reader OptionsMagnetic Stripe Reader Magnetic Stripe Card Magnetic Stripe Reader SlotSmart Card Reader Using the Accessories Belt ClipClip printer to belt Printer can pivot freely Adjustable Shoulder Strap Using the Shoulder StrapInstalling the RW 420 in the Cradle CradlesNormal Display Cradle Display rotated CradleCharge Power Indicator IndicatorRemoving the RW 420 from the Cradle RW 220 Vehicle Cradle Refer to FigureRemoving the RW 220 from the Cradle Preventive Maintenance Extending Battery LifeGeneral Cleaning Instructions Cleaning RW Series Printers Troubleshooting LCD Control Panel IndicatorsTroubleshooting Topics No powerFlashing or icon Troubleshooting Techniques Communications DiagnosticsPerforming a Forced Shutdown Calling Technical Support Installed software Settings forWireless options InstalledConfiguration Label Example Configuration Label Example Specifications Printing SpecificationsMemory/Communications Specifications RW 420 Media Specifications RW 220 Media SpecificationsCommunication Ports Combination PortCommunications Ports USBFont/Bar Code Specifications UCC/EANPhysical/Environmental/Electrical Specifications RW 420 Overall Dimensions 94 mm max 81 mm Max 175 mm 160 mm 188 mm185.3 mm 111.8 mm 173.6 mm 99.1 mm94.1 mm1 81 mm1 # 6-32 x Mm deep Places RW Series Accessories Appendix a Interface Cables RS232 Download CableUSB Download Cable Part Number AK17463-008 RW Mod Plug to 9-Pin DB PC CableMore Interface Cables USB Cable Part Number AT17010-1 USB a to USB Mini B CableAppendix B Media SuppliesMaintenance Supplies Appendix CAppendix D Product SupportAmericas contact Europe, Africa, the Middle East, and India contactProduct Configuration ProductCode Serial NumberBattery Disposal Appendix EProduct Disposal Using zebra.com Appendix FSelect printer model e.g. RW Select languageClick on Software & Utilities tab to download Label Vista Index Magnetic Stripe Reader 43 Smart Card ReaderBluetooth radio ZBR3 & QL+ZBR4 802.11b Compact Flash radio 34,?36Patent Numbers 201,255 B1