Zebra Technologies manual RW 420 Media Specifications, RW 220 Media Specifications

RW 420 Media Specifications

Media Width	2.0 in. to 4.12 in.
	(50.8 to 104.6 mm)
Max. continuous	Continuous, dependent on installed memory
receipt (w/std. memory)
Inter-label Gap.	0.08 in. to 0.16 in. (0.12 in. preferred)
	(2 mm to 4 mm [3 mm preferred])
Label Thickness	.0025” to .0065” (.064 mm to .165 mm)
Max. Label Roll dia.	2.25 in. (57 mm) O.D.
Label Inner Core	.75 in. (19 mm) minimum dia;
	1.38 in. (35 mm) optional setting
Black Mark	The reflective media black marks should
Dimensions	extend past the centerline of the roll.
Media	Minimum mark width: 1.0” (25.4 mm)
Requirements	perpendicular to edge of media, centered within
	the width of the roll.
	Mark length: 0.094” (2.4 mm) parallel to edge of
	media
RW 220 Media Specifications
Media Width	1.0” in. to 2.37 in.
	[25.4 to 60.1 mm]
Max. continuous	Continuous, dependent on installed memory
receipt (w/std. memory)
Inter-label Gap.	0.08 in. to 0.16 in. (0.12 in. preferred)
	(2 mm to 4 mm [3 mm preferred])
Label Thickness	.0025” to .0065” (.064 mm to .165 mm)
Max. Label Roll dia.	2.25 in. [57 mm] O.D.
Label Inner Core	.75 in. [19 mm) minimum dia;
	1.38 in. (35 mm) optional setting
Black Mark	The reflective media black marks should
Dimensions	extend past the centerline of the roll.
Media	Minimum mark width: .5” (12.7 mm)
Requirements	perpendicular to edge of media, centered within
	the width of the roll.
	Mark length: 0.094” (2.4 mm) parallel to edge of
	media

UseZebrabranddirectthermalmediathatisoutsidewound.Mediamaybereflective(blackmark)sensing, or transmissive (gap) sensing, die-cut, or continuous. RW 420 units configured with the External Media option will accept fanfold media used with an external media supply.

For die-cut labels, use only full auto dies.

continued

67

RW Series User Guide