P4T/RP4T User Guide
Manual Introduction | RP4T Printers 35 | |
pg. | pg. | |
4 |
|
|
P4T Overview- pg. 5 | Maintenance pg. 36 | |
Printer Preparation pg. 7 | 38 | Troubleshooting pg. |
Connecting the Printer pg. 27 | 43 | Speci†cations pg. |
Radio Regulatory Information pg. 31 | Appendices pg. 46 | |
| Index pg. 52 |
Charging the P4T Series Battery with the
Figure 4B: Charging the P4T Series Battery with the DC Adapter
DC Power Cord (open wires)
P4T Series DC
Adapter
p/n
Open the protective cover for access to the charger receptacle
•Open the protective cover on the P4T Series printer to expose the charger jack and the communication ports.
•Plug the right angled barrel plug from the
•Connect the black cable ground
•Connect the white cable power (+) terminal to the vehicle power source (preferably at the vehicle fuse box). The following table details how the DC Adapter and P4T Series printers interact:
Printer | Charging | Printer LCD | Power Button Operation | |
Status | Status |
|
| |
O¨ | O¨ | O¨ | Pressing turns printer On | |
On | O¨ | Normal display operation | Pressing turns printer O¨ | |
|
| Normal display operation, plus | Pressingswitchesprintertolimited | |
On | On | battery icon will cycle through | operation:onlybatterycharging& | |
levelbars.Chargingwillcontinue | LCD functional | |||
|
| |||
|
| as required.. |
| |
|
| Battery icon will cycle through | Pressing turns printer On. Printer | |
O¨ | On | level bars. Printer turns o¨ at | will run normally | |
|
| end of charge cycle. |
|
Note: If the battery is out of its safe charging temperature range (either too hot or too cold) the printer will display the following: “Charging will resume when battery is in the range
«ash and . Once the battery reaches a safe charging temperature, normal charging will automatically resume.
Section Continues
2