Zebra Technologies PR4T manual Specifications, Printing Speci†cations, Communications Ports

Page 43

P4T/RP4T User

Specifications

Manual Introduction	RP4TPrinters 35	Note.- Printer specifications are subject to change without
		notice.


pg	pg	Printing Speci†cations

Figure 19- P4T Series Communication Ports

Guide

	.	.
	4
			Maximum Print Width	4.09 in. [103,8 mm]
				2.0 in. /sec. [50,8 mm/second ]
		Maintenance pg. 36	Print Speed @ 30% density	Direct Thermal mode
			Print Speed @ 30% density	1.5 in/sec. [38,1 mm/second]
	P4T Overview- pg. 5			1.5 in/sec. [38,1 mm/second]
				Thermal Transfer mode
			DistancefromPrintElementtoTear	0.39 in. [9,91 mm] 41 dots
			Edge	0.39 in. [9,91 mm] 41 dots
			Edge
			Print Head Life	1,000,000 inches (25.4 Km) min.
			Print Density	203 dots/inch (8 dots/mm)

Memory/Communications Speci†cations

RS232/USB

Combination

Port

1

5

USB

Printer Preparation pg. 7	Troubleshooting pg. 38
Connecting Printer pg	Speci†cations 43

Flash Memory

RAM Memory

Standard Communications

8 MB «ash (standard)

16 MB RAM)

RS-232C serial port (RJ-45 connector) Con†gurable Baud rate (from 9600 to 115.2 Kbps), parity and data bits. Software (X-ON/X-OFF) or hardware (DTR/STR) communication handshake protocols.

Two USB 2.0 Full Speed Interface connections:

(1)a “B” type USB connector, and

(2)USB signals are also integrated into the RJ-45 connector.

Refer to the Communications Ports speci†cations and Appendix A for information on USB cables.

Bluetooth 2.0 compatible 2.4 GHz SRRF link WirelessLANcapabilitiescomplywith802.11bor802.11g

10

Communications Ports

USB

	Signal			Description
	Pin#	Name	Type	Description
	Pin#	Name	Type
	1	VBUS		USB Bus Power
	2	USB -	bi-directional	I/O signals
	3	USB +	bi-directional	I/O signals
	4	USB_ID		Identi†es A/B connector
	5	Return		Ground

the . 27	pg.
Radio Regulatory Information pg. 31	Appendices pg. 46
	Index pg. 52

OptionalWirelessCommunications

Real Time Clock (RTC)

protocols

Co-located Bluetooth 2.0 + 802.11b/g radios (P4T only)

Time and date under application control. Refer to CPCL Programming Manual,availableat www.zebra.com for RTC commands.

RS232/USB

Signal

Pin#

1

2

3

4

5

6

7

8

9

10

Name	Type

USB D-	bi-directional
USB D+	bi-directional
RXD	input
TXD	output
DTR	output
GND
DSR	input
RTS	output
CTS	input
VBUS

Description

I/O signals I/O signals Receive Data Transmit Data

Data Terminal Ready- set high when printer is on.

Ground

Data Set Ready- low to high

Request To Send- set high when printer is ready to accept a command or data

Clear To Send from host USB Bus Power

Section Continues

43

Image 43

Contents UMAN-P4T-013 Rev.A Manual Introduction RP4T PrintersPrinter Preparation pg Index pgProprietary Statement Document Conventions RP4T Printers 35 Manual Introduction Introduction to the P4T SeriesUnpacking and Inspection Reporting DamageP4T/RP4T Overview Printer Preparation pg Troubleshooting pgUSB Port Thermal Transfer P4T Series TechnologyRadio Regulatory Information pg Appendices pg Index pg Direct ThermalCharger Safety Battery SafetyPrinter Preparation LI72 Charger AT17696-xx Single Battery ChargerApproved Chargers Unauthorized equipmentIndex Battery Charging Receptacle P4T Series Battery PackLI72 Battery Charger Connecting Printer Speci†cationsInput Voltage Maintenance pgP4T Series Battery LED Status Charger StatusP4T Series AC Adapter Protective cover For access to Charger ReceptacleVaries with LocationP4T Series DC Adapter DC Power Cord open wiresP4T Vehicle Cradle DC Adapter Access the charger receptacle located on the bottomVehicle cradle as Indicated Installation Guidelines DC Adapter You to monitor the charging process per Indicators under each battery will allowTable below Installing the P4T Series Battery Pack Installing the P4T Series Battery PackLoad the Media Media Spacer Rear Feed Slot External Media Source Loading Media From An External SupplyPrinter pg Close the Media CoverAdjusting The Media Support Disks Close the media cover and ensure it latches in place Close the Printer CoversPast the printhead CoverOperator Controls Printer ControlsTion for more information on the printer status icons Function Default setting Scroll & Select Options Programmable LCD SettingsWlan ID Pull Strap here Adjustable Shoulder StrapSnap into feature on printer Hold Buckle To lengthenProper working order. You can do this by printing a con Verify the Printer Is WorkingBefore you connect the printer to your computer or Portable data terminal, make sure that the printer isCable Communications Connecting the PrinterDetails ConnectorConnector Connector ConnectorCommunications with your printer Connect the Printer by RadioSetting Up the Software Wireless CommunicationsBluetooth Networking Overview Radio Regulatory Information Bluetooth ZBR4 RadioEuropean Regulatory Information for this Radio Europe EU Declaration of Conformity NCC Taiwan Compliance Statement802.11b/g and Bluetooth Co-located Radio Modules Con†guration Rfid optionPrinter Model DigitGeneration 2 Class 1 UHF Passive Tags Supported By The P4T Model RP4T Rfid EncoderExtending Battery Life Preventive MaintenanceGeneral Cleaning Instructions Mechanism P4T Series CleaningTroubleshooting Topics TroubleshootingIcon Status Indication Ref. to Troubleshooting Topic Poor or faded print or low battery icon «ashing Troubleshooting TopicsTo enter Communications Diagnostics Mode Troubleshooting TechniquesTo terminate the Communications Diagnostics Mode Bluetooth radio First diagnostic report for all P4T Series printersSecond diagnostic report for a printer with an End of second diagnostic report Second diagnostic reportCommunications Ports SpecificationsPrinting Speci†cations Memory/Communications Speci†cationsRegulatory pg Index pg Radio Information AppendicesRotation Angles Fonts Available External Media Supply Loading Slot Physical/Environmental/Electrical Speci†cations220,5 mm 57 in ,5mm 80,2 mmPart Number AK18666-1 RW Mod Plug to USB a Cable Manual Introduction RP4T Printers P4T pg MaintenanceAppendix B Appendix C Maintenance SuppliesMedia Supplies Asia Paci†c region, contact Appendix DProduct Support Americas, contactAppendix E Select manual type Click on Submit Appendix FAppendix G- Patents Index UMAN-P4T-013 Rev. a May Zebra Technologies Corporation