Nortel Networks W/WOL Installing the Network Driver in a Novell NetWare Server, Click Close, Type

Page 53

Software Installation

8.Click Close.

The System Settings Change dialog box opens. Restarting your system is necessary to enable your PC to finish setting up your new hardware.

9.Click Yes.

Your system restarts.

Installing the Network Driver in a Novell NetWare 4.x Environment

This section describes the steps required to install the BayStack 21 network driver software in a Novell NetWare version 4.x environment. You must install and configure the software on your Novell server and client.

If you are installing the BayStack 21 network driver software in a Novell NetWare version 3.12 environment, refer to the Readme.txt file on the BayStack 21 PCI 10/ 100 Adapter w/WOL Software & Documentation CD.

Installing the Network Driver in a Novell NetWare Server

To install the BayStack 21 network driver in a Novell NetWare server:

1.Verify that your Novell NetWare server includes the following files:

•\NETWARE\SERVER\4.X\MSM.NLM (Media Support Module)

•\NETWARE\SERVER\ETHERTSM.NLM (Topology Specific Module for Ethernet)

2.Change to the Novell NetWare server directory. For instance, type the command:

CD\NWSERVER

3.Type:

SERVER

4.Press Enter.

5.At the server prompt, enter:

LOAD INSTALL

6.From the Installation Options menu, select Driver options.

206379-A

3-23

Image 53

Contents Part No -A September Great America Parkway Santa Clara, CA Trademarks Copyright 1999 Nortel NetworksUSA Requirements Only EN 55 022 StatementVoluntary Control Council for Interference Vcci Statement 206379-A Restricted Rights Legend Nortel Networks NA Inc. Software License Agreement Vii Viii Contents Chapter Using the WOL Feature Appendix B Novell NetWare Reference Information Xii Figures 26. Microsoft TCP/IP Properties Dialog Box Tables Xvi Text Conventions PrefaceBefore You Begin Technical Solutions Center Telephone Number Technical Publications How to Get HelpBayStack 21 PCI 10/100 Adapter w/WOL Overview Chapter IntroductionBayStack 21 Network Card Product FeaturesProduct Description LEDs RJ-45 Ethernet PortDescribes the Link and Activity LED indications WOL Cable and ConnectorSystem Requirements WOL ConnectorSupported Operating Systems Operating EnvironmentsEthernet Cables 10 Mb/s Cable RequirementsFast Ethernet Cables 100 Mb/s Page Package Contents Chapter Hardware InstallationInstalling the BayStack 21 PCI 10/100 Adapter w/WOL Connecting the WOL Cable Page Chapter Software Installation Turn on the power to the workstation, and start Windows PreinstallationInstalling the Network Driver in a Windows 95 Environment New Hardware Found Window-BayStack Network Card Click Next Update Device Driver WizardRemove any CDs from your CD drive Click Yes Click FinishSelect the Identification tab Figure Configuring the Windows 95 EnvironmentConfiguring the Workstation Identification Enter the following information for your workstation System Settings Change Dialog BoxNetwork Dialog Box-Configuration Tab Configuring the Network PropertiesSelect Protocol Click Add Click Add11. Configuration Tab, BayStack 21 Network Card Selected 12. TCP/IP Properties Dialog Box Click PropertiesRemove all CDs from the CD drive Click Yes Installing the Network Driver in a Windows 98 Environment14. New Hardware Found Window 16. Copying Files Dialog Box Select one of the following options 18. System Settings Change Dialog BoxSelect Nortel BayStack 21 10/100 PCI Ethernet Adapter Configuring the Windows 98 Environment20. TCP/IP Properties Dialog Box Select the Adapters tab Figure Installing the Network Driver in a Windows NT EnvironmentClick Have Disk Select Add23. Select OEM Option Dialog Box Select Auto Click OKClick the Protocols tab Configuring the Network PropertiesMicrosoft TCP/IP Properties dialog box opens Figure From the Installation Options menu, select Driver options Installing the Network Driver in a Novell NetWare ServerClick Close TypeSpecifying Driver Parameters Press EnterPress Enter at each of the following four prompts Enter the following commands, in order Installing the Network Card in a Novell NetWare ClientSetting Up the Workstation Chapter Using the WOL FeatureOpen a WOL utility, such as the Magic Packet Utility Figure Running the WOL FeatureMagic Packet Utility identification window opens Figure Send a Magic Packet to One Host dialog box opens Figure Diagnostic LEDs Chapter TroubleshootingSoftware Issues Hardware IssuesTypical PCI Slot Parameters Page Product Specifications Appendix a Technical SpecificationsSoftware Drivers Table A-1. Technical SpecificationsNovell NetWare Server AUTOEXEC.NCF Files and Parameters Appendix B Novell NetWare Reference InformationOne Network Card Installed Slot Parameter Sample AUTOEXEC.NCF File ParametersNode Parameter Sample NET.CFG Files Novell NetWare Client Commands and NET.CFG FileClient Commands Page Numbers IndexIndex-2