Nortel Networks 21 PCI 10/100, W/WOL manual Software Drivers, Table A-1. Technical Specifications

Page 66

Installation and Reference for the BayStack 21 PCI 10/100 Adapter w/WOL

Table A-1. Technical Specifications (continued)

Environment
Operating:	0° to 50° C (32° to 122° F)
Humidity:	5% to 95%, noncondensing
Power Consumption	+5 V DC at 145mA (Standby)
	+5 V DC at 300mA (Transmit)
Network Interface
10BASE-T:	RJ-45 (UTP Cable, Categories 3, 4, 5)
100BASE-TX:	RJ-45 (UTP Cable, Category 5)
Data Interface	32-bit bus-mastering PCI
I/O Address	Automatically determined by configuration space
Interrupt	INT A, mapping to BIOS IRQ setup
LED Indicators	10 Mb/s, 100 Mb/s, Activity

Software Drivers

Table A-2 lists the available software drivers for the BayStack 21 PCI 10/100 Adapter w/WOL. Refer to Chapter 3, “Software I nstallation,” for installation instructions regarding the Windows-based drivers. Refer to the README files associated with other drivers for installation instructions.

Table A-2.	Available Software Drivers

Driver	Compatible Operating Systems

Microsoft	Windows 95/Windows 98
	Windows NT 3.51, 4.0
	Windows for Workgroups 3.11
	LAN Manager 2.x
Novell NetWare	NetWare 3.1x, 4.x
	32-bit ODI driver
	16-bit DOS ODI driver
	Client32 for Windows 95
SCO	UNIX 3.2.4
	ODT 5.0
Other	NDIS2 DOS Mode Driver
	Packet Driver

A-2

206379-A

Image 66

Contents Part No -A September Great America Parkway Santa Clara, CA USA Requirements Only Copyright 1999 Nortel NetworksTrademarks EN 55 022 StatementVoluntary Control Council for Interference Vcci Statement 206379-A Restricted Rights Legend Nortel Networks NA Inc. Software License Agreement Vii Viii Contents Chapter Using the WOL Feature Appendix B Novell NetWare Reference Information Xii Figures 26. Microsoft TCP/IP Properties Dialog Box Tables Xvi Preface Before You BeginText Conventions Technical Publications How to Get Help Technical Solutions Center Telephone NumberChapter Introduction BayStack 21 PCI 10/100 Adapter w/WOL OverviewProduct Features Product DescriptionBayStack 21 Network Card RJ-45 Ethernet Port LEDsWOL Cable and Connector Describes the Link and Activity LED indicationsWOL Connector System RequirementsOperating Environments Supported Operating SystemsCable Requirements Fast Ethernet Cables 100 Mb/sEthernet Cables 10 Mb/s Page Chapter Hardware Installation Package ContentsInstalling the BayStack 21 PCI 10/100 Adapter w/WOL Connecting the WOL Cable Page Chapter Software Installation Preinstallation Installing the Network Driver in a Windows 95 EnvironmentTurn on the power to the workstation, and start Windows New Hardware Found Window-BayStack Network Card Update Device Driver Wizard Click NextClick Finish Remove any CDs from your CD drive Click YesConfiguring the Windows 95 Environment Configuring the Workstation IdentificationSelect the Identification tab Figure System Settings Change Dialog Box Enter the following information for your workstationConfiguring the Network Properties Network Dialog Box-Configuration TabClick Add Select Protocol Click Add11. Configuration Tab, BayStack 21 Network Card Selected Click Properties 12. TCP/IP Properties Dialog BoxInstalling the Network Driver in a Windows 98 Environment Remove all CDs from the CD drive Click Yes14. New Hardware Found Window 16. Copying Files Dialog Box 18. System Settings Change Dialog Box Select one of the following optionsConfiguring the Windows 98 Environment Select Nortel BayStack 21 10/100 PCI Ethernet Adapter20. TCP/IP Properties Dialog Box Installing the Network Driver in a Windows NT Environment Select the Adapters tab FigureSelect Add Click Have DiskSelect Auto Click OK 23. Select OEM Option Dialog BoxConfiguring the Network Properties Click the Protocols tabMicrosoft TCP/IP Properties dialog box opens Figure Click Close Installing the Network Driver in a Novell NetWare ServerFrom the Installation Options menu, select Driver options TypePress Enter Specifying Driver ParametersPress Enter at each of the following four prompts Installing the Network Card in a Novell NetWare Client Enter the following commands, in orderChapter Using the WOL Feature Setting Up the WorkstationRunning the WOL Feature Open a WOL utility, such as the Magic Packet Utility FigureMagic Packet Utility identification window opens Figure Send a Magic Packet to One Host dialog box opens Figure Chapter Troubleshooting Diagnostic LEDsHardware Issues Software IssuesTypical PCI Slot Parameters Page Appendix a Technical Specifications Product SpecificationsTable A-1. Technical Specifications Software DriversAppendix B Novell NetWare Reference Information Novell NetWare Server AUTOEXEC.NCF Files and ParametersOne Network Card Installed Sample AUTOEXEC.NCF File Parameters Slot ParameterNode Parameter Novell NetWare Client Commands and NET.CFG File Client CommandsSample NET.CFG Files Page Index NumbersIndex-2