Installation and Reference for the BayStack 21 PCI 10/100 Adapter w/WOL
Installing the Network Card in a Novell NetWare Client
To install the BayStack 21 network driver in your Novell NetWare client:
1.Verify that your BayStack 21 network card is properly installed in your Novell NetWare workstation.
2.Insert the BayStack 21 Network Driver CD into the CD drive in your workstation.
3.Access the Novell NetWare client directory.
4.Copy the following command to the client directory:
\NETWARE\DOSODI\B21ODI10.COM
5.Enter the following commands, in order:
lsl b21odi10 ipxodi netx (or vlm)
6.Press Enter.
You can now log in to your network.
7.Edit the NET.CFG file to change driver parameters.
8.Verify that there is a protocol binding for Ethernet 802.3 in the NET.CFG file.
Refer toAppendix B, “Novell NetWare Reference Information ” for sample NET.CFG files.
|