Nortel Networks W/WOL, 21 PCI 10/100 manual Magic Packet Utility identification window opens Figure

Using the WOL Feature

3.Enter the subnet mask of the remote workstation you want to turn on.

The utility maps, or locates, BayStack 21 network cards in the subnet you specified. Make sure the remote workstation is still turned on. It should not be in standby or shutdown mode.

4.Click OK.

The Magic Packet Utility identification window opens (Figure 4-3).

Figure 4-3. Magic Packet Utility Identification Window

5.Click OK.

The NewGroup window opens (Figure 4-4), displaying information about the remote workstation you want to turn on.

Figure 4-4. NewGroup Window

You can now turn on the remote workstation. Continue with these instructions when the workstation is in standby or shutdown mode.

206379-A 4-3