Nortel Networks W/WOL manual Novell NetWare Client Commands and NET.CFG File, Sample NET.CFG Files

Novell NetWare Reference Information

Novell NetWare Client Commands and NET.CFG File

This section provides information about commands and the NET.CFG file.

Client Commands

Table B-1 briefly describes the commands you enter when installing the

BayStack 21 network driver into your Novell NetWare client.

Table B-1.	Commands
Command	Description
lsl	Supports the OSI link support layer
b21odi10	Client driver copied from the BayStack 21 PCI 10/100 Adapter
	w/WOL Software & Documentation CD
ipxodi	Default protocol stack
netx (or vlm)	Server connection

Sample NET.CFG Files

The MLDI section of the NET.CFG file is the section usually edited.

The following NET.CFG file is a sample:

Link Driver B21ODI10 FRAME Ethernet_802.2 FRAME Ethernet_802.3 FRAME Ethernet_II FRAME Ethernet_SNAP PROTOCOL IPX 0 Ethernet_802.3

.

.

MEDIUM AUTO ;operate on auto negotiation mode

;MEDIUM 10HALF ;operate on 10M/HalfDuplex mode

;MEDIUM 10FULL ;operate on 10M/Fullduplex mode

;MEDIUM 100HALF ;operate on 100M/HalfDuplex mode

;MEDIUM 100FULL ;operate on 100M/Fullduplex mode

206379-A B-5