Nortel Networks W/WOL, 21 PCI 10/100 manual Sample AUTOEXEC.NCF File Parameters, Slot Parameter

Page 69

Novell NetWare Reference Information

Sample AUTOEXEC.NCF File Parameters

This section describes the AUTOEXEC.NCF file parameters SLOT, FRAME, NODE, and Medium.

SLOT Parameter

The SLOT parameter specifies which adapter is enabled when multiple BayStack 21 PCI Network Cards are installed in your workstation. The SLOT keyword is an index value corresponding to PCI BIOS. The mapping from the SLOT parameter to the physical PCI slot is different from one workstation to another.

The following are examples of typical SLOT parameters:

LOAD C:B21LAN10 SLOT=3 FRAME=ETHERNET_802.2

LOAD C:B21LAN10 SLOT=4 FRAME=ETHERNET_II

FRAME Parameter

The FRAME parameter specifies which type of frame is used by the BayStack 21 network driver.

Accepted values include:

•Ethernet_802.3

•Ethernet_802.2

•Ethernet_II

•Ethernet_SNAP

Multiple frame types can be enabled by loading the same driver with different FRAME type parameters.

The following are examples of typical SLOT parameters:

LOAD C:B21LAN10 FRAME=ETHERNET_802.2

LOAD C:B21LAN10 FRAME=ETHERNET_802.3

LOAD C:B21LAN10 FRAME=ETHERNET_II

LOAD C:B21LAN10 FRAME=ETHERNET_SNAP

206379-A

B-3

Image 69

Contents Part No -A September Great America Parkway Santa Clara, CA Trademarks Copyright 1999 Nortel NetworksUSA Requirements Only EN 55 022 StatementVoluntary Control Council for Interference Vcci Statement 206379-A Restricted Rights Legend Nortel Networks NA Inc. Software License Agreement Vii Viii Contents Chapter Using the WOL Feature Appendix B Novell NetWare Reference Information Xii Figures 26. Microsoft TCP/IP Properties Dialog Box Tables Xvi Preface Before You BeginText Conventions Technical Solutions Center Telephone Number Technical Publications How to Get HelpBayStack 21 PCI 10/100 Adapter w/WOL Overview Chapter IntroductionProduct Features Product DescriptionBayStack 21 Network Card LEDs RJ-45 Ethernet PortDescribes the Link and Activity LED indications WOL Cable and ConnectorSystem Requirements WOL ConnectorSupported Operating Systems Operating EnvironmentsCable Requirements Fast Ethernet Cables 100 Mb/sEthernet Cables 10 Mb/s Page Package Contents Chapter Hardware InstallationInstalling the BayStack 21 PCI 10/100 Adapter w/WOL Connecting the WOL Cable Page Chapter Software Installation Preinstallation Installing the Network Driver in a Windows 95 EnvironmentTurn on the power to the workstation, and start Windows New Hardware Found Window-BayStack Network Card Click Next Update Device Driver WizardRemove any CDs from your CD drive Click Yes Click FinishConfiguring the Windows 95 Environment Configuring the Workstation IdentificationSelect the Identification tab Figure Enter the following information for your workstation System Settings Change Dialog BoxNetwork Dialog Box-Configuration Tab Configuring the Network PropertiesSelect Protocol Click Add Click Add11. Configuration Tab, BayStack 21 Network Card Selected 12. TCP/IP Properties Dialog Box Click PropertiesRemove all CDs from the CD drive Click Yes Installing the Network Driver in a Windows 98 Environment14. New Hardware Found Window 16. Copying Files Dialog Box Select one of the following options 18. System Settings Change Dialog BoxSelect Nortel BayStack 21 10/100 PCI Ethernet Adapter Configuring the Windows 98 Environment20. TCP/IP Properties Dialog Box Select the Adapters tab Figure Installing the Network Driver in a Windows NT EnvironmentClick Have Disk Select Add23. Select OEM Option Dialog Box Select Auto Click OKClick the Protocols tab Configuring the Network PropertiesMicrosoft TCP/IP Properties dialog box opens Figure From the Installation Options menu, select Driver options Installing the Network Driver in a Novell NetWare ServerClick Close TypeSpecifying Driver Parameters Press EnterPress Enter at each of the following four prompts Enter the following commands, in order Installing the Network Card in a Novell NetWare ClientSetting Up the Workstation Chapter Using the WOL FeatureOpen a WOL utility, such as the Magic Packet Utility Figure Running the WOL FeatureMagic Packet Utility identification window opens Figure Send a Magic Packet to One Host dialog box opens Figure Diagnostic LEDs Chapter TroubleshootingSoftware Issues Hardware IssuesTypical PCI Slot Parameters Page Product Specifications Appendix a Technical SpecificationsSoftware Drivers Table A-1. Technical SpecificationsNovell NetWare Server AUTOEXEC.NCF Files and Parameters Appendix B Novell NetWare Reference InformationOne Network Card Installed Slot Parameter Sample AUTOEXEC.NCF File ParametersNode Parameter Novell NetWare Client Commands and NET.CFG File Client CommandsSample NET.CFG Files Page Numbers IndexIndex-2