Rockford Fosgate 50.1 Specifications subject to change without notice, 100Watts 200 Watts

50.2 SPECIFICATIONS

Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4V Per channel into a 4Ω load

Per channel into a 2Ω load Per channel into a 1Ω load

2-channel bridged into a 2Ω load

Continuous Power Rating (Competition Standard) - Measured at 13.8 Battery Volts RMS continuous power per channel, all channels driven

into a 4Ω load from 20 to 20,000Hz with less than 0.05% THD (Total Harmonic Distortion)

RMS continuous power per channel, all channels driven

into a 2Ω load from 20-20,000Hz, with less than 0.10% THD

RMS continuous power per channel, all channels driven into 1Ω load from 20-20,000Hz, with less than 0.3% THD

RMS continuous power bridged into a 2Ω load from 20-20,000Hz, with less than 0.3% THD

Common Mode Rejection Ratio (CMRR):

Signal-to-Noise Ratio:

Frequency Response:

Bandwidth:

Damping Factor @ 4Ω (at output connector):

Slew Rate:

IM Distortion (IHF):

Input Impedance:

Source Unit Compatibility (+15dB gain overlap)

Input Sensitivity (+0dB gain overlap):

Pass-Thru Output (ref. 1V input @ 1kHz):

B+ Fuse Size: (External to amplifier)

Fuse Type:

Crossover Slope

Factory Crossover Frequency:

Factory Default Crossover Setting:

Dimensions: (including end caps)

Specifications subject to change without notice.

– 46 –

50Watts

90Watts

150Watts

300Watts

25Watts

50Watts

100Watts

200 Watts

Typically 40dB >100dB (A-weighted)

20Hz-20,000Hz ±0.5dB

10Hz–250kHz ±3dB >200

50V ms <0.05%

20k Ohms

28V max. input

Variable from 300mV to 5V Variable from 100mV to 960mV 40 Amp or two 20 Amp

AGU

12dB/octave Butterworth 80Hz (0.047mf)

Full Range

9-5/8"W x 13-9/32"L x 2-5/8"H (24.4cm) x (33.73cm) x (6.6cm)