Rockford Fosgate 50.2, 50.1 manual Specifications, 100Watts 200Watts 325Watts 650Watts 50Watts

50.1 SPECIFICATIONS

Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4V Mono into a 4Ω load

Mono into a 2Ω load Mono into a 1Ω load

2-channel Bridged (using 2 Punch 50.1) into a 2Ω load

Continuous Power Rating (Competition Standard) – Measured at 13.8 Volts RMS continuous power mono, into a 4Ω load from 20-20,000Hz

with less than 0.05% THD

RMS continuous power mono, into a 2Ω load from 20-20,000Hz with less than 0.10% THD

RMS continuous power mono, into a 1Ω load from 20-20,000Hz with less than 0.3% THD

RMS continuous power bridged, (using 2 Punch 50.1 Power amplifiers in the same system) into a 2Ω load from 20-20,000Hz with less than 0.3% THD

Signal-to-Noise Ratio:

Frequency Response:

Bandwidth:

Damping Factor @ 4Ω (at output connector):

Slew Rate:

IM Distortion (IHF):

Input Impedance:

Source Unit Compatiblity (+15dB gain overlap):

Input Sensitivity (+0dB gain overlap):

Pass-Thru Output:

B+ Fuse Size: (External to amplifier)

Fuse Type:

Crossover Slope:

Factory Crossover Frequency:

Factory Default Crossover Setting:

Dimensions:

100Watts

200Watts

325Watts

650Watts

50Watts

100Watts

200Watts

400 Watts

>100dB (A-weighted)

20Hz-20,000Hz ±0.5dB

10Hz–250kHz ±3dB

>200

50V ms

<0.05%

20k Ohms

28V max. input

Variable from 300mV to 5V

Unity Gain

40 Amp or two 20 Amp

AGU

12dB or 24dB/octave Butterworth

80Hz (0.047mf)

Full Range

9-5/8"W x 13-9/32"L x 2-5/8"H (24.4cm) x (33.73cm) x (6.6cm)

Specifications subject to change without notice.

– 47 –