The Speaker Company TTP-245 Plus user manual Troubleshooting, LED Status

Page 45

6. Troubleshooting

The following guide lists the most common problems that may be encountered when operating this bar code printer. If the printer still does not function after all suggested solutions have been invoked, please contact the Customer Service Department of your purchased reseller or distributor for assistance.

6.1 LED Status

This section lists the common problems that according to the LED status and other problems you may encounter when operating the printer. Also, it provides solutions.

LED

Printer

Possible

Recovery Procedure

 

 

 

 

Status /

Status

Cause

 

Color

 

 

 

 

 

 

OFF

No response

No power

* Turn on the power switch.

 

 

 

* Check if the green LED is lit on power

 

 

 

supply. If it is not lit on, power supply

 

 

 

is broken.

 

 

 

* Check both power connections from

 

 

 

the power cord to the power supply

 

 

 

and from the power supply to the

 

 

 

printer power jack if they are

 

 

 

connected securely.

 

 

 

 

Solid Green

ON

The printer is

* No action necessary.

 

 

ready to use

 

 

 

 

 

Green with

Pause

The printer is

* Press the FEED button to resume for

blinking

 

paused

printing.

 

 

 

 

Red with

Error

The out of label or

1. Out of label or ribbon

blinking

 

ribbon or the

* Load a roll of label and follow the

 

 

printer setting is

instructions in loading the media then

 

 

not correct

press the FEED button to resume for

 

 

 

printing.

 

 

 

* Load a roll of ribbon and follow the

 

 

 

instructions in loading the ribbon then

 

 

 

press the FEED button to resume for

 

 

 

printing.

 

 

 

2. Printer setting is not correct

 

 

 

* Initialize the printer by instructions in

 

 

 

“Power on Utility” or “Diagnostic Tool”.

 

 

 

 

 

 

40

 

Image 45
Contents TTP-245 Plus / TTP-343 Plus TTP-247 / TTP-345 Contents LED UL, CUL Copyright Declaration Compliances급기기 Introduction Equipment ChecklistGetting Started Unpacking and InspectionDealer option Top front view Printer PartsSetting Up the Printer SetupThread the ribbon leading tape downward pass the print head Loading the RibbonRibbon installation Loading Label Stock Label roll installationLabel installation Attach the external roll mount to the printer External Label Roll Mount Installation OptionThen push down the top cover gently Remove the front panel Peel-off Module Installation OptionConnect peelTenonsensor cable to main board Peel-off panel installation Open the top cover Loading the Paper in Peel-off ModeComplete label installation for peel-off mode Cutter Module Installation Option Cutter module installation Cutter Niche Label installation in cutter mode Loading Label in Cutter ModeInstructions to Top Cover Operation Top cover is fully open and ready to close Start the Diagnostic Tool Diagnostic ToolFunction Description Using USB interface to setup Ethernet interface Setting Ethernet by Diagnostic Utility OptionUsing RS-232 interface to setup Ethernet interface Using Ethernet interface to setup Ethernet interface Page SD card spec SD card capacity Approved SD card manufacturer Install Memory CardV1.0 MicroSD 512 MB Panasonic Transcend, Panasonic Ribbon and Gap/Black Mark Sensor Calibration Power on UtilitiesGap/Black Mark Calibration, Self-test and Dump Mode Self-test Gap/black mark sensor intension Dump mode printout Dump modePrinter Initialization Skip AUTO.BAS Set Gap Sensor as Media Sensor and Calibrate the Gap SensorPrinter will be interrupted to run the AUTO.BAS program Cleaning MaintenanceInterior LED Status TroubleshootingPrint Quality Problem Possible Cause Recovery ProcedurePage LED and Button Operation LEDButton Operation Gap/Black Mark Set Gap Sensor as Revise History Date Content Editor

TTP-245 Plus specifications

The Speaker Company TTP-245 Plus is an advanced audio solution designed to meet the demands of professional audio environments while providing an impressive listening experience for home use as well. With its cutting-edge technology and user-friendly features, the TTP-245 Plus stands out in the highly competitive speaker market.

One of the main features of the TTP-245 Plus is its robust audio fidelity. This speaker employs a two-way design, which integrates a powerful woofer with a precision-engineered tweeter. This configuration results in a wide frequency response that captures lows, mids, and highs with clarity and accuracy. Audiophiles will appreciate the deep bass and detailed treble, making it suitable for a diverse range of musical genres and audio content.

The TTP-245 Plus leverages advanced crossover technology, ensuring seamless integration between the woofer and tweeter. This technology allows for optimal sound distribution, creating a coherent audio landscape that enhances the listening experience. As a result, users can enjoy an immersive soundstage, whether they're using the speakers for casual listening, movies, or professional audio monitoring.

In terms of connectivity, the TTP-245 Plus offers versatile options, including standard ΒΌ-inch TRS inputs and RCA connections. This flexibility allows users to easily integrate the speakers with various audio equipment, from mixers and audio interfaces to home theater systems. The inclusion of a user-friendly interface ensures smooth operation regardless of the user's technical expertise.

The build quality of the TTP-245 Plus is another highlight. These speakers feature a sturdy cabinet that minimizes resonance and enhances overall sound quality. The sleek and modern design not only complements any aesthetic but also ensures durability for long-term use in both studio and home environments.

Another noteworthy characteristic is the onboard EQ settings that enable users to tailor the sound profile to their preferences. This allows for greater control over audio output, making it easier to adapt to different room acoustics or personal taste.

Overall, the Speaker Company TTP-245 Plus embodies a harmonious blend of technology, quality, and user-centric features, making it an exceptional choice for anyone seeking superior audio performance in various settings. Whether for professional use or personal enjoyment, the TTP-245 Plus delivers on its promise of delivering outstanding sound quality.