3.6 Cutter Module Installation (Option)
1.Pull the top cover open levers to open the top cover.
2.Remove the front panel from the lower cover.
Lower Cover
Fig. 22 Pull the lever to open the cover
3.Open the top cover and hold it and push down and push backward the top cover support then push backward the top cover.
4.Use a screwdriver to screw off 6 screws on the lower inner cover.
Screws
Front Panel 
Screws
Lower Inner Cover Lower Cover
Top Cover
Top Cover Support
Flute
Fig. 23 Remove 6 screws from lower inner cover
16