RCA Fibre Channel Switch installation manual

Page 22

Trap Severity Options

---------------------

unknown, emergency, alert, critical, error, warning, notify, info, debug, mark

Contact

(string, max=32

chars)

["On-call engineer"]

Location

(string, max=32

chars)

["Rack 3-B"]

Trap1Address

(dot-notated IP

Address)

[192.168.217.5]

Trap1Port

(decimal value)

 

[162]

Trap1Severity

(see allowed options above)

[warning]

Trap1Enabled

(True / False)

 

[True]

Trap2Address

(dot-notated IP

Address)

[192.168.216.48]

Trap2Port

(decimal value)

 

[162]

Trap2Severity

(see allowed options above)

[warning]

Trap2Enabled

(True / False)

 

[True]

Trap3Address

(dot-notated IP

Address)

[0.0.0.0]

Trap3Port

(decimal value)

 

[162]

Trap3Severity

(see allowed options above)

[warning]

Trap3Enabled

(True / False)

 

[False]

Trap4Address

(dot-notated IP

Address)

[0.0.0.0]

Trap4Port

(decimal value)

 

[162]

Trap4Severity

(see allowed options above)

[warning]

Trap4Enabled

(True / False)

 

[False]

Trap5Address

(dot-notated IP

Address)

[0.0.0.0]

Trap5Port

(decimal value)

 

[162]

Trap5Severity

(see allowed options above)

[warning]

Trap5Enabled

(True / False)

 

[False]

ReadCommunity

(string, max=32

chars)

[public]

WriteCommunity

(string, max=32

chars)

[private]

TrapCommunity

(string, max=32

chars)

[public]

AuthFailureTrap

(True / False)

 

[False]

Do you want to save and activate this snmp setup? (y/n): [n] y

Your monitoring station should now receive all traps from your Fibre Channel switch. You can test this by creating a fault condition, such as disconnecting one of your Fibre Channel connections to the Fibre Channel switch. A message should appear in the NetCentral manager.

22

Fibre Channel Switch

16 April, 2003

Image 22
Contents Fibre Channel Switch Fibre Channel Switch Contents Contents Authorized Support Representative Web Technical SupportPhone Support Profile Users GroupProduct Support Welcome How to use the manuals Support for your Fibre Channel switchInstalling a Switch in a Profile Video Network Profile System Software Requirements PDR Series Fibre Channel firmware and driver requirements Loading PDR Series firmwareConfiguring Fibre Channel on your PDR Series systems Loading Fibre Channel Server firmwareConfiguring Fibre Channel on your PDR Series Enter administrator mode Configuring your Fibre Channel switchConfigure Ethernet LAN settings Configuring your Fibre Channel switch Verify firmware versionPort and switch configuration ArbffRttov ThresholdMonitoringEnabled True / False Fabric topology Connecting devices to the switchCable lengths Compatible Fibre Channel DevicesMonitoring your switch with NetCentral Snmp configuration Fibre Channel Switch Setting port aliases Monitoring Status Monitoring Status Troubleshooting with NetCentral Resetting the switch to factory defaults Resetting the switch manuallyFibre Channel Switch