Setting port aliases
Setting port aliases
You can configure NetCentral to set the reporting name of each port on your QLogic SANbox2 Switch to something meaningful to you. When NetCentral reports the status of a port, or notifies you of a problem, you may find it convenient to see a name that you chose
To set port aliases:
1.Select the switch you want to configure in the NetCentral List View or Facility View.
2.Choose Device Port Settings for that device. The Port Settings dialog box opens.
3.Select the Port Alias for each port in turn and enter the desired alias. The figure shows modified aliases for Port #0 through Port #7.
4.Click OK to set the aliases.
16 April, 2003 | Fibre Channel Switch | 23 |