RCA Fibre Channel Switch How to use the manuals, Support for your Fibre Channel switch

Page 8

How to use the manuals

The following table describes how to use the documentation set that accompanies your QLogic SANbox2 Switch and other Grass Valley products.

For information on...

See...

 

 

 

 

Installing the switch in a

“Installing a Switch in a Profile Video Network” beginning on

Profile Video Network

page 9 of this manual.

 

SANbox2 Fibre Channel Switch Installer’s/User’s Manual

 

SANbox2 Switch Management User’s Manual

 

 

Installing the switch in a

Media Area Network Instruction Manual

Media Area Network

SANbox2 Fibre Channel Switch Installer’s/User’s Manual

 

SANbox2 Switch Management User’s Manual

 

 

Configuring the Fibre Channel

“Monitoring your switch with NetCentral” beginning on page 20

switch for NetCentral monitoring

of this manual.

 

SANbox2 Fibre Channel Switch Installer’s/User’s Manual

 

SANbox2 Switch Management User’s Manual

 

 

NOTE: Carefully read and understand all procedures before attempting any operation with your switch. Procedures such as replacing modules in the 8 to

64-port switch can produce unexpected results if you do not follow the published procedures exactly.

Support for your Fibre Channel switch

Your QLogic SANbox2 Switch is sold, supported, and serviced by Grass Valley.

If you have any questions about your QLogic SANbox2 Switch, or if you need any help or service for the switch, please contact your local Grass Valley Support representative listed at the front of this manual

NOTE: Do not contact QLogic directly for support of your QLogic SANbox2

Switch.

8

Fibre Channel Switch

16 April, 2003

Image 8
Contents Fibre Channel Switch Fibre Channel Switch Contents Contents Web Technical Support Phone SupportAuthorized Support Representative Profile Users GroupProduct Support Welcome How to use the manuals Support for your Fibre Channel switchInstalling a Switch in a Profile Video Network Profile System Software Requirements PDR Series Fibre Channel firmware and driver requirements Loading PDR Series firmwareConfiguring Fibre Channel on your PDR Series systems Loading Fibre Channel Server firmwareConfiguring Fibre Channel on your PDR Series Configure Ethernet LAN settings Configuring your Fibre Channel switchEnter administrator mode Configuring your Fibre Channel switch Verify firmware versionPort and switch configuration ArbffRttov ThresholdMonitoringEnabled True / False Connecting devices to the switch Cable lengthsFabric topology Compatible Fibre Channel DevicesMonitoring your switch with NetCentral Snmp configuration Fibre Channel Switch Setting port aliases Monitoring Status Monitoring Status Troubleshooting with NetCentral Resetting the switch to factory defaults Resetting the switch manuallyFibre Channel Switch