Transcend Information TS1G-32GCF133 Words 7-8 Number of Sectors per Card, Word 22 ECC Count

Page 60

TS1G~32GCF133

133X CompactFlash Card

 

 

 

￿Words 7-8: Number of Sectors per Card

This field contains the number of sectors per CompactFlash Storage Card. This double word value is also the first invalid address in LBA translation mode.

￿Words 10-19: Serial Number

This field contains the serial number for this CompactFlash Storage Card and is right justified and padded with spaces (20h).

￿Word 22: ECC Count

This field defines the number of ECC bytes used on each sector in the Read and Write Long commands. This value shall be set to 0004h.

￿Words 23-26: Firmware Revision

This field contains the revision of the firmware for this product.

￿Words 27-46: Model Number

This field contains the model number for this product and is left justified and padded with spaces (20h).

￿Word 47: Read/Write Multiple Sector Count

Bits 15-8 shall be the recommended value of 80h or the permitted value of 00h. Bits 7-0 of this word define the maximum number of sectors per block that the CompactFlash Storage Card supports for Read/Write Multiple commands.

￿Word 49: Capabilities Bit 13: Standby Timer

If bit 13 is set to 1 then the Standby timer is supported as defined by the IDLE command If bit 13 is set to 0 then the Standby timer operation is defined by the vendor.

Bit 11: IORDY Supported

If bit 11 is set to 1 then this CompactFlash Storage Card supports IORDY operation.

If bit 11 is set to 0 then this CompactFlash Storage Card may support IORDY operation. Bit 10: IORDY may be disabled

Bit 10 shall be set to 0, indicating that IORDY may not be disabled. Bit 9: LBA supported

Bit 9 shall be set to 1, indicating that this CompactFlash Storage Card supports LBA mode addressing. CF devices shall support LBA addressing.

Bit 8: DMA Supported If bit 8 is set to 1 then Read DMA and Write DMA commands are supported. Bit 8 shall be set to 0. Read/Write DMA commands are not currently permitted on CF cards.

￿PIO Data Transfer Cycle Timing Mode

The PIO transfer timing for each CompactFlash Storage Card falls into modes that have unique parametric timing specifications. The value returned in Bits 15-8 shall be 00h for mode 0, 01h for mode 1, or 02h for mode 2. Values 03h through FFh are reserved.

￿Translation Parameters Valid

Bit 0 shall be set to 1 indicating that words 54 to 58 are valid and reflect the current number of cylinders, heads and sectors. If bit 1 of word 53 is set to 1, the values in words 64 through 70 are valid. If this bit is cleared to 0, the values reported in words 64-70 are not valid. Any CompactFlash Storage Card that supports PIO mode 3 or above shall set bit 1 of word 53 to one and support the fields contained in words 64 through 70.

￿Current Number of Cylinders, Heads, Sectors/Track

These fields contains the current number of user addressable Cylinders, Heads, and Sectors/Track in the current translation mode.

￿Current Capacity

This field contains the product of the current cylinders times heads times sectors.

Transcend Information Inc.

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Placement Features DimensionsDescription Transcend Block Diagram Pin Assignments and Pin Type TS1G~32GCF133 Signal Description 133X CompactFlash CardDir Signal Name Dir Pin Description Inpack Iowr VCC Wait Electrical Specification TS1G~32GCF133Output Drive Type Output Drive Characteristics Signal Interface TS1G~32GCF133133X CompactFlash Card Pull-up pin 45 BVD2 to avoid sensing their batteries as LowUltra DMA Electrical Requirements Series termination required for Ultra DMA operationTable Typical Series Termination for Ultra DMA Ultra DMA Mode Cabling Requirement Attribute Memory Read Timing Specification TS1G~32GCF133 Common Memory Read Timing Specification Common Memory Write Timing Specification Input Read Timing Specification TS1G~32GCF133 Output Write Timing Specification TS1G~32GCF133 True IDE PIO Mode Read/Write Timing Specification TS1G~32GCF133 True IDE Ultra DMA Mode Read/Write Timing Specification Table Ultra DMA Data Burst TimingTS1G~32GCF133 TS1G~32GCF133 TS1G~32GCF133 TS1G~32GCF133 Card Configuration Multiple Function CompactFlash Storage CardsAttribute Memory Function Attribute Memory FunctionConfiguration Option Register Base + 00h in Attribute Memory TS1G~32GCF133 Pin Replacement Register Base + 04h in Attribute Memory Socket and Copy Register Base + 06h in Attribute Memory Table Pcmcia Mode I/O Function Transfer FunctionCommon Memory Transfer Function Table Common Memory FunctionTrue IDE Mode I/O Transfer Function Metaformat Overview CF-ATA Drive Register Set Definition and Protocol Primary and Secondary Address Configurations Table Primary and Secondary I/O DecodingContiguous I/O Mapped Addressing Table Contiguous I/O DecodingTrue IDE Mode Addressing Memory Mapped AddressingCF-ATA Registers Data Register Address 1F0h170hOffset 0,8,9Feature Register Address 1F1h171h Offset 1, 0Dh Write Only Sector Count Register Address 1F2h172h OffsetSector Number LBA 7-0 Register Address 1F3h173h Offset Cylinder Low LBA 15-8 Register Address 1F4h174h OffsetTS1G~32GCF133 Device Control Register Address 3F6h376h Offset Eh Card Drive Address Register Address 3F7h377h Offset Fh CF-ATA Command Set LBADefinitions Check Power Mode 98h or E5h Execute Drive Diagnostic 90h Erase Sectors C0hFlush Cache E7h Format Track 50hWord Default Total Data Field Type Information Identify Device EchTotal Data Field Type Information Word 0 General Configuration Word 1 Default Number of CylindersWord 3 Default Number of Heads Word 6 Default Number of Sectors per TrackWord 49 Capabilities Bit 13 Standby Timer PIO Data Transfer Cycle Timing ModeWords 7-8 Number of Sectors per Card Words 10-19 Serial NumberMultiple Sector Setting Total Sectors Addressable in LBA ModeMultiword DMA transfer Word 64 Advanced PIO transfer modes supportedWords 82-84 Features/command sets supported Word 68 Minimum PIO transfer cycle time with IordyWords 85-87 Features/command sets enabled Word 88 Ultra DMA Modes Supported and SelectedWord 91 Advanced power management level value Word 160 Power Requirement DescriptionWord 89 Time required for Security erase unit completion Word 128 Security Status Bit 8 Security LevelValue Maximum PIO mode timing selected Additional Requirements for CF Advanced Timing ModesValue Value Maximum Pcmcia IO timing mode Supported Value Maximum Memory timing mode SupportedIdle 97h or E3h Idle Immediate 95h or E1h Initialize Drive Parameters 91hNOP 00h Read Buffer E4h Read DMA C8h Read Long Sector 22h or 23hTS1G~32GCF133 Seek 7Xh Set Features EFh Feature Supported TS1G~32GCF133 Standby Immediate 94h or E0h Translate Sector 87h Translate Sector InformationWear Level F5h Write Buffer E8h Write DMA CAh TS1G~32GCF133 TS1G~32GCF133 Error Posting Smart Command Set Smart Command Set Smart Feature Register ValuesSmart Data Structure Decription

TS1G-32GCF133 specifications

Transcend Information, a leading manufacturer of storage and multimedia products, offers a range of high-performance memory solutions. One prominent product is the TS1G-32GCF133, a compact and reliable CompactFlash (CF) card designed for various applications, from professional photography to industrial use and embedded systems.

At the heart of the TS1G-32GCF133 is its 32GB storage capacity, which provides ample space for storing high-resolution images, videos, and data files. This capacity meets the demands of both casual users and professionals requiring significant storage for their content. The card adheres to the CompactFlash Association's CF Type I specifications, ensuring compatibility with a wide range of devices, including DSLRs, camcorders, and even embedded systems.

One of the standout features of this model is its impressive transfer speed. The TS1G-32GCF133 boasts a read speed of up to 133x, which translates to around 20MB/s. This relatively high-speed performance is critical for users who need quick access to data, especially when capturing bursts of images or recording video. The card's write speed, while somewhat lower, ensures that data can still be written effectively without significant delay, making it suitable for various recording scenarios.

Transcend has implemented advanced technologies in the TS1G-32GCF133 to enhance both performance and reliability. The use of SLC (single-level cell) technology in some areas ensures greater endurance and stability, which is particularly important in professional applications where data integrity is paramount. Additionally, the card is equipped with built-in ECC (Error Correction Code) functionality, which detects and corrects potential errors during data transfer, further safeguarding the stored information.

Physical durability is another critical aspect of the TS1G-32GCF133. This CompactFlash card is designed to withstand harsh conditions, making it suitable for use in demanding environments. Its robust construction is resistant to shock, vibration, and extreme temperatures, providing peace of mind for users who need reliable performance in the field or in industrial settings.

In terms of compatibility, the TS1G-32GCF133 supports both the CF5 and CF6 standards, allowing it to work seamlessly with a wide range of devices. The card is also backward compatible with older CF devices, making it a versatile choice for those upgrading their storage solutions.

In conclusion, the Transcend Information TS1G-32GCF133 stands out as a reliable and high-performance CompactFlash card that meets the needs of diverse users. With its substantial storage capacity, impressive transfer speeds, advanced technologies, and robust design, it serves as an ideal solution for professionals and enthusiasts alike who seek performance and reliability in their memory storage.
Top Page Image Contents