American Power Conversion XS 450 -48 Smart Cable DB9 Connection, RJ45 Ethernet Connector, N/C-C

Page 32

is possible by DB-9 cable on the Console Port of the module and via RJ-45 (Ethernet) cable on the 10/100 Base-T port on the Network Management Card.

“Smart” Cable DB9 Connection

The DB9 connector on the top left hand side of the unit uses the special RS-232 cable (APC part number 940-0024C) to allow local access through a Terminal Emulation program like HyperTerminal™ or Procomm™ (**). This port is labeled as “Console”.

RJ45 Ethernet Connector

The optional management card has an RJ-45 connector to support a TCP/IP protocol over a 10BaseT Ethernet Local Area Network (LAN).

CAUTION: The Web/SNMP card has a lithium battery. This battery is not field serviceable.

Danger of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the manufacturer’s instructions

Relay Output Connections

There are eight relays available that provide outputs via Form “C” relay contacts. The last two of these are pre-assigned as the Minor and Major relay outputs. The Major relay is energized (N/O-COM contacts closed) during normal (non-alarm) operating conditions; all the other relays energize when an alarm condition occurs. The other six outputs are initially designated as “Relay 1” through “Relay 6”. Any of the various system alarm conditions can be assigned to any of the eight relay outputs. Wago connectors are located on the customer interface card mounted in the top right side of the unit. The relay contacts should only be used to switch resistive loads of 0.5 A or less at 60 Vdc or less. Table 3.10-1 shows the alarm output connection designations.

RELAY

TERMINAL

USER ALARM NOTES

OUTPUT

DESIGNATION

 

 

N/O-N/C-C

 

RELAY #1

N/O1-N/C1-C1

________________________

RELAY #2

N/O2-N/C2-C2

________________________

RELAY #3

N/O3-N/C3-C3

________________________

RELAY #4

N/O4-N/C4-C4

________________________

RELAY #5

N/O5-N/C5-C5

________________________

RELAY #6

N/O6-N/C6-C6

________________________

MINOR

N/O7-N/C7-C7

________________________

MAJOR

N/O8-N/C8-C8

________________________

Table 3.10-1 Output Relay Connections

Magnum XS 450 Power System –48 VDC User’s Manual

Page 27

Image 32
Contents Magnum XS Vdc Power System User’s Manual Table of Contents Magnum XS 450 Power System -48 VDC User’s Manual Specifications Revision History Revision Date DescriptionSafety First General PrecautionsIntroduction General InformationMagnum XS 450 Power System -48 VDC User’s Manual How to Use This Manual Installation Mechanical InstallationUnpacking Equipment Room / Location1 Door Clearance Dimensions Mounting VentilationAC Power Connections AC Kit with Three Phase SpreaderAC Line AC Neutral Earth Ground AC Kit with Phoenix Terminals Only AWGRectifier Shelf and Module Installation Rectifier AC Input Connections Rectifier Shelf Serial CommunicationsRectifier Shelf Mechanical Module Selection DC Distribution Module InstallationRectifier Module Installation Merlin Gerin 28 Circuit Breaker Module Installation 1 28 Circuit Breaker ModuleMerlin Gerin 12 Circuit Breaker Module Installation NH2 Fuse Module Installation Circuit Breaker Rating Ordering NumberDC Cabling General Instructions 3 NH2 Fuse ModuleDC Distribution Installation Circuit Breaker Installation2 Merlin Gerin 28 CB Module Installation Detail C60 C120 Total 4 CB Alarm Interface Board 28 circuit breaker module Installing a fuse in the NH2 Fuse Module DC Load Return Module InstallationBattery Installation Battery Tray InstallationBattery Installation Battery Disconnect Module InstallationNegative Battery Cable Connections 1 Battery Cable ConnectionsBattery Temperature Probe Installation Battery Return Module InstallationPositive Battery Cable Connections Network Management Card DC System GroundingMonitoring and Relay Output Connections RJ45 Ethernet Connector Smart Cable DB9 ConnectionRelay Output Connections N/C-CExternal Alarm Input Connections Open Closed NO-C NC-CElectrical Installation Battery Visual and Safety InspectionCommissioning Pre-Commissioning InspectionCommissioning Battery Temperature Compensation LVD TestCircuit Breaker/ Fuse Test User InputsFinal Inspection LVDRectifier Management OperationTechnical Description Battery Management DC DistributionCustomer Interface Board Alarm Outputs Output RelaysExternal Alarm Inputs Input Relays Preventive Maintenance System Visual and Safety InspectionEquipment InspectionTest Battery Temperature Test System Temperature TestBattery Current Test Battery Preventive Maintenance Procedure Specifications AC Input DCPM28HN54SH0 RectifierMechanical EnvironmentalCompliance EMCAPC Worldwide Customer Support Limited Product Warranty

XS 450 -48 specifications

The American Power Conversion (APC) XS 450 -48 is a reliable and efficient power supply solution designed for critical applications requiring a consistent and stable power source. This solution is particularly beneficial for telecommunications, data centers, and industrial settings where power reliability is paramount.

One of the key features of the XS 450 -48 is its ability to deliver 450 watts of continuous power, ensuring that connected devices receive uninterrupted power supply. Its 48-volt output makes it ideal for telecom requirements, where 48V systems are standard. The unit provides a compact and space-saving design, making it suitable for installation in rack-mounted configurations, optimizing the utilization of valuable real estate in server rooms or equipment racks.

The XS 450 -48 utilizes advanced technologies that enhance its performance and reliability. It is equipped with an active power factor correction (PFC) system that significantly reduces harmonic distortion. This feature not only improves system efficiency but also complies with various regulations concerning power quality. Additionally, the power supply includes built-in over-voltage protection, over-current protection, and short-circuit protection, ensuring that both the power supply and the connected devices are safeguarded against electrical faults.

The unit is designed for high efficiency, often exceeding 90% under full load conditions. This not only reduces energy costs but also minimizes heat generation, contributing to a quieter operation environment. The XS 450 -48's intelligent thermal management system allows it to operate in a range of temperatures, making it highly versatile and adaptable to varying environmental conditions.

Furthermore, monitoring and management capabilities are integrated into the XS 450 -48 with optional external monitoring systems. These systems provide critical insights, allowing technicians to track real-time performance metrics, detect potential issues early on, and perform preventive maintenance.

In conclusion, the American Power Conversion XS 450 -48 stands out as a robust power supply solution that combines reliable performance, advanced protection features, and high efficiency. Its design caters to the specific needs of telecommunications and data centers, making it an indispensable asset for maintaining the uptime and integrity of critical systems. With its range of features and reliability, the XS 450 -48 continues to be a preferred choice among professionals in the field.