APC DP300E Series manual Programming example Highest Station No

Page 22

Programming Parameters

Programming example – Highest Station No.

Parameters are selected by pressing the C key – one or more times.

Action

Display shows

	1.	Press	and	simultaneously to open	Key in password
	1.	Press	and	simultaneously to open	:
				for password input	:
				for password input
	2.	Enter password xx xx xx by pressing
					Last selected
					parameter

3.Press or until

4. Press

for change

5.Press to store

6.Repeat steps 3 to 5 for the rest of the parameters:

7.Wait about 1 second

8.Press to exit.

Highest station address : 2

Highest station address : 3

Data stored

Highest station address : 3

Station address

:1

APM testmode active : NO

Battery connection

:separate

Normal operation RED. 3/3 1%

7OA0004 US rev. 02

22	User Guide Silcon DP300E Series 480V 400-500kVA

Image 22

Contents Silcon DP300E Series 480V 400-500kVA User Guide User Guide Silcon DP300E Series 480V 400-500kVAImportant Safety Instructions Table of Contents General IntroductionIntroduction Display unitStop stand-by Stop Start and Operating the External Service Bypass PanelStart from stand-by Switching off Silcon DP3400E DP3500E Stop for complete power downDisplay shows Start from complete power down Starting up Silcon DP3400E DP3500EAction Display shows Single Utility Dual UtilityBypassing the UPS Lamp indication on bypass panelUPS operation Switching the system from external bypass into normalSingle Utility ActionBypassing the parallel UPS system Emergency UPS not alive Press on the keyboard Press or on the keyboard until Following can be carried out on any UPS Isolating one UPS for service/maintenance Operation OperationKeyboard description Programming Parameters Parameter Setting CommentsProgramming Parameters ParametersProgramming example switch to bypass operation Keys used for programming346 Programming of system configuration parameters438 326Programming example change charge voltage to Programming of battery monitor Installation of new batteriesProgramming parameters for advanced parallel operation Description of settingsParallel programming/operation Programming guideProgramming example Highest Station No Alarm texts conc. parallel operation Parallel operation alarms GeneralOther reasons for parallel operation alarm Reading Out Measurements MeasurementsDescription Alarm stack AlarmsAlarms What To Do Alarm messagesEvents logger Mode CommentsDisplaying the events stack Possible alarms Possible alarm Description ActionTemperature on static bypass System is locked in oper UPS has attempted 10 times Remote Display Possible alarm DescriptionRemote Display Remote Display OperationAdjusting contrast Battery Preventive MaintenancePreventive Maintenance FanBattery capacity test Actions Display showsBack-up time Battery monitor testFunctionality of battery test Monitor functionBattery monitor reset Operation of the battery monitorBattery monitor test Battery monitor autoEconomy Operation Economy OperationTechnical data System SpecificationsSystem Specifications InputHow to Contact APC How to Contact APC