Remote Display
NOTE:
Utility = Mains
Possible alarm | Description |
|
|
Battery MCB is off | Battery MCCB not closed or released |
|
|
High temp. isolation transformer | Temperature on isolation input/output |
| transformer too high |
Battery voltage high | Battery voltage outside limits |
|
|
High inverter temperature | Temperature on main or delta inverter |
| too high |
|
|
Battery voltage low, warning | The battery is nearly discharged |
|
|
Inverter current limiter active | Peak current limiter has been activated |
| and UPS switched to bypass operation. |
| System overload |
|
|
Overload. Load is over 100% | Overload on UPS |
|
|
Bypass is out of tolerance | Bypass input voltage outside limits |
|
|
Mains is out of tolerance | Utility input voltage outside limits |
|
|
7.1.6Adjusting contrast
As described in chapter 1.0 Introduction.
7OA0004 US rev. 02
User Guide Silcon DP300E Series 480V | 31 |