Economy Operation
NOTE:
When using economy mode there is NO power factor correction on the input or regulation of output voltage.
9.0Economy Operation
9.1General
In economy operation the load is supplied directly from the utility, however the UPS is monitoring the utility and the output voltages and will in case of utility failure switch to battery operation without interruptions.
The system will in order to keep the batteries fully charged at all times switch to normal operation in a
The operation of the system is the same as already described in this guide with the exception of the following points:
-When starting up, the system will at first go into normal operation to ensure a fully charged battery, but will then switch into bypass after the programmed time
7OA0004 US rev. 02
36 | User Guide Silcon DP300E Series 480V |