American Power Conversion 400, 600, 250 user manual Difficulty

Page 23

7.0 Difficulty

ENGLISH

Caution !

This Uninterruptible Power Source contains potentially hazardous voltages. Do not attempt to disassemble the unit. The unit contains no user serviceable parts. Repairs are performed only by factory trained service personnel.

This Uninterruptible Power Source uses batteries. The batteries will eventually become too weak to provide rated autonomous operation. To obtain battery replacement or repair service, please call the Customer Service telephone number on the cover of this manual for information on the Service Center nearest you.

The batteries used by this Uninterruptible Power Source are recyclable. Proper disposal of the batteries is required. The batteries contain lead and pose a hazard to the environment and human health if not disposed of properly. Please refer to local codes for proper disposal requirements or return the unit to a factory authorized Service Center for battery replacement or disposal.

Batteryreplacementshouldbeperformedorsupervisedbypersonnelfamiliarwith the danger of batteries and the required precautions. Keep unauthorized personnel away from batteries. When replacing batteries, use the same number and type of sealed lead acid batteries as were originally contained in your UPS.

CAUTION - Do not dispose of battery in a fire. The batteries may explode.

CAUTION - Do not open or mutilate the battery or batteries. They contain an electrolyte which is toxic and harmful to the skin and eyes.

CAUTION - A battery can present a risk of electrical shock and high short circuit current. When replacing batteries, wrist watches and jewelry such as rings should be removed. Use tools with insulated handles.

Page21

Image 23
Contents Back-UPS Please save this manual Important safety instructionsTable of contents Remote interface IntroductionOverview Surge suppression and EMI/RFI filteringEnglish SafetySécurité Deutsch Sicherheit¡ Seguridad Load types InstallationPlacement Receiving inspectionBattery charging Connecting to the utilityConnecting your equipment to the UPS Example labels found at system equipment rear panels Test for proper operation Overloads Principles of operation Noise and surge suppression Inverter Load transfer switchBattery charger BatteryOperation during a utility failure TransformerMonitoring and control electronics Page17 Audible alarm Controls and indicatorsPower I/0 switch Test switch on units so equippedInterface Kits PowerChute SoftwareUPS monitoring Computer interface port Difficulty Difficulté Vorsicht SchwierigkeitDificultad KmjSgWh KjnndSgW TRpnW RTodji oj oRfW Troubleshooting chartPage26 Replacing the battery Obtaining Service Extended storage Storing the UPSStorage conditions Run time versus load Specifications Declaration of Conformity Life support policy Limited Warranty∗ Mailing