Epson TM-T85P manual GS a n

	After waiting for the period specified by t, the LED indicator blinks
	and the printer waits for the PAPER FEED button to be pressed.
	After the button is pressed, the printer executes the macro once. The
	printer repeats the operation r times.
[Notes]	• If this command is received while a macro is being defined, the
	macro definition is aborted and the definition is cleared.
	• If the macro is not defined or if r is 0, nothing is executed.
	• When the macro is executed by pressing the PAPER FEED button
	(m = 1), paper can not be fed by using the PAPER FEED button.
[Reference]	GS :

GS a n

[Name]	Enable/Disable Automatic Status Back
[Format]	ASCII	GS	a	n
	Hex	1D	61	n
	Decimal	29	97	n
[Range]	0 ≤ n ≤ 255

[Description]		Enables or disables ASB and specifies the status items to include,
		using n as follows:
Bit	Off/On		Hex	Decimal	Status for ASB
0	Off		00	0	Drawer kick-out connector pin 3 status disabled.
	On		01	1	Drawer kick-out connector pin 3 status enabled.
1	Off		00	0	Off-line status disabled.
	On		02	2	Off-line status enabled.
2	Off		00	0	Error status disabled.
	On		04	4	Error status enabled.
3	Off		00	0	Paper roll sensor status disabled.
	On		08	8	Paper roll sensor status enabled.
4	-		-	-	Undefined.
5	-		-	-	Undefined.
6	-		-	-	Undefined.
7	-		-	-	Undefined.

Commands 5-47