Epson TM-T85P manual ➀ GS k m d1...dk NUL ➁ GS k m n d1...dn

[Description] Selects a font for the HRI characters used when printing a bar code. n selects a font from the following table:

n			Font
0, 48			Font A (12 × 24)
1, 49			Font B (9 × 24)
	• HRI indicates Human Readable Interpretation.
[Note]	• HRI characters are printed at the position specified by GS H.
[Default]	n = 0
[Reference]	GS H, GS K
GS h n
[Name]	Select bar code height
[Format]	ASCII	GS	h	n
	Hex	1D	68	n
	Decimal	29	104	n
[Range]	0 ≤ n ≤ 255

[Description] Selects the height of the bar code.

	n specifies the number of dots in the vertical direction.
[Default]	n = 162
[Reference]	GS K

➀GS k m d1...dk NUL ➁ GS k m n d1...dn

[Name]	Print bar code
[Format]	➀ASCII	GS	k	m	d1...dk	NUL
	Hex	1D	6B	m	d1...dk	00
	Decimal	29	107	m	d1...dk	0
	➁ASCII	GS	k	m	n	d1...dn
	Hex	1D	6B	m	n	d1...dn
	Decimal	29	107	m	n	d1...dn
[Range]	➀ 0 ≤ m ≤ 6 (k and d depends on the bar code system used)

➁65 ≤ m ≤ 73 (n and d depends on the bar code system used) [Description] Selects a bar code system and prints the bar code.

Commands 5-51