Epson TM-T85P manual 4Commands

•When Auto Status Back (ASB) is enabled using the GS a command, the status transmitted by the DLE EOT command and the ASB status must be differentiated.

•If the value of n is out of the specified range, the printer ignores this command.

n = 1: Printer status

Bit	Off/On	Hex	Decimal	Function
0	Off	00	0	Not used. Fixed to Off.
1	On	02	2	Not used. Fixed to On.
	Off	00	0	Drawer open/close signal is LOW (connector pin
				3).
2
	On	04	4	Drawer open/close signal is HIGH (connector pin
				3).
3	Off	00	0	On-line.
	On	08	8	Off-line.
4	On	10	16	Not used. Fixed to On.
5,6	-	-	-	Undefined.
7	Off	00	0	Not used. Fixed to Off.

n= 2: Off-line status

Bit	Off/On	Hex	Decimal	Function
0	Off	00	0	Not used. Fixed to Off.
1	On	02	2	Not used. Fixed to On.
2	Off	00	0	Cover is closed.
	On	04	4	Cover is open.
	Off	00	0	Paper is not being fed by using the PAPER FEED
3				button.
	On	08	8	Paper is being fed by the PAPER FEED button.
4	On	10	16	Not used. Fixed to On.
5	Off	00	0	No paper-end stop.
	On	20	32	Printing stops due to paper end.

5-4Commands