Epson TM-T85P manual ESC V n, 24Commands

➁If the starting position is the upper right or lower left of the printing area, data is buffered in the paper feed direction: Commands using horizontal motion units: ESC 3, ESC J, GS $, GS \

Cmmands using vertical motion units: ESC SP, ESC $, ESC \

[Default]	n = 0
[Reference]	ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \

ESC V n

[Name]	Turn 90° clockwise rotation mode on/off
[Format]	ASCII	ESC	V	n
	Hex	1B	56	n
	Decimal	27	86	n
[Range]	0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description]	Turns 90° clockwise rotation mode on or off.
	n is used as follows:

n

0, 48

1, 49

Function

Turns off 90 ° clockwise rotation mode

Turns on 90 ° clockwise rotation mode

[Notes]	• When underline mode is turned on, the printer does not underline
	90° clockwise-rotated characters.
	• Double-width and double-height commands in 90° rotation mode
	enlarge characters in the opposite directions as from double-
	height and double-width commands in normal mode.
	• This command has no effect in page mode.
	• If this command is input in page mode, the printer performs only
	internal flag operations.
[Default]	n = 0
[Reference]	ESC !, ESC -

ESC W xL xH yL yH dxL dxH dyL dyH

[Name]	Set printing area in page mode
[Format]	ASC II	ESC	W	xL xH yL yH dxL dxH dyL dyH
	Hex	1B	57	xL xH yL yH dxL dxH dyL dyH
	Decimal	27	87	xL xH yL yH dxL dxH dyL dyH
[Range]	0 ≤ xL, xH, yL, yH, dxL, dxH, dyL, dyH ≤ 255

[Description] • The horizontal starting position, vertical starting position, printing area width, and printing area height are defined as x0, y0, dx (inch), dy (inch), respectively.

Each setting for the printing area is calculated as follows:

5-24Commands