Toshiba TDP-MT500 owner manual Plugging power cord, Connection

Page 20

VIEWING VIDEO IMAGES

B. Plugging power cord

In the case of power outlets provided with an earthing terminal inlet:

Plug the attached power cable as it is.

Earthing terminal

12

Power cable

1Plug the attached power cable into the power cable inlet of this projec- tor.

2Plug the other end of the power cable into a power outlet.

In the case of power outlets provided with no earthing terminal inlet:

U-shaped metal

3	4	Power plug
		Conversion adaptor

1

2

Power cable

1Plug the attached power cable into the power cable inlet of this projec- tor.

2Fit the attached conversion adaptor to the other end of the power cable.

3Connect the U-shaped metal of the conversion adaptor to the earthing terminal of the power outlet (Earthing

connection).

•If there is no earthing terminal with the power outlet, ask the delivery agent of this projector for the earthing work (To be charged).

•Be sure to make earthing connection before connecting the power plug to the power outlet. Further, when dis- connecting the earthing connection, be sure to unplug the power plug from the power outlet at

4Plug the power plug of the conver- sion adaptor into the power outlet.

•Be sure to use an AC-100V power outlet with earthing terminal for supply to this projector.

•Never connect the earthing metal of the power plug of the conversion adaptor to any of gas pipes, water pipes and lightning conductors.

20

Image 20

Contents TDP-MT500 Safety Precautions Source of Light Important Safety InstructionsPower Sources Ventilation Power-Cord Protection CleaningHeat Water and MoistureAccessories Object and Liquid EntryDo not place the product verti- cally AttachmentsDamage Requiring Service Replacement PartsService Safety CheckAir exhaust UsePower Supply Cord Selection Important PrecautionsPlace and Manner of Installation Save Original Packing MaterialsAvoid Volatile Liquid Declaration of ConformityTable of Contents Preparation Checking accessoriesInserting the dry batteries into the remote controller Name and function of operational parts of the projector Zoom ring 18On the picture quality adjusting buttons How to use remote controllerName and function of operational parts of remote controller Operational range of remote controller Front of projector Vertical directionsSetting UP Setting up screenBasic setup Adjusting projection angleWhere the screen size is 16 Screen size and Projection distanceWhere the screen size is 4 Wide Height HViewing Video Images Connecting to video equipment that has DVI-D terminal Viewing Video ImagesPlugging power cord ConnectionPress Power button Select an input signalAdjust focus by turning the focus ring Making projectionIf the projected image frame is deformed to a trapezoid Press Power button againTurn OFF the main power switch Turn to indication O On setting Aspect Image angle How to change the settingsTor port of the computer Connecting this projector with a computerViwing Computer Images Turn on the main power switch Turn to indication Power button / Power indicatorPress Power button again Setting with Menus Menu constructionHow to make menu setting Professional Picture Menu Items that can be set with menusPicture Menu Component 1 DVI-ANALOG/DIGITAL On the memory for projected image qualityVideo Adjusting projected images Adjusting color Color Thickness and TintSetting projected images sharper or softer Sharpness Color ThicknessUSER1 USER2 Setting with Menus Replacing the Lamp / Cleaning the Projector How to replace the lampCleaning the lens Cleaning dust in the intake ventCleaning the projector Troubleshooting Picture images are not projected on screenTroubleshooting Indicators Power Lamp Temp StateState RemarkWhen Asking Installation Work Dimensional drawings for referencesTerminals TDP-MT500Type of connectable signals VGASvga XGA