Power button / Power indicator

VIEWING COMPUTER IMAGES

C. Making projection

Preparations:

•Remove the lens cap.

•Turn on power for the connected video equipment.

Main power switch

Focus ring

Zoom ring

1 Turn “ON” the main power switch (Turn to indication I).

•When the main power switch is MENU/EXIT ENTER

turned on, POWER indicator comes POWER	Lighting in orange
on in orange.	LAMP
	TEMP

•If the projector finished operation without sufficient cooling, the following operation of the main power button may not work during the time when the cooling fan is turning. (At this time POWER indicator blinks in orange.) After the fan has stopped turning, press the power button again to turn on the indicator in orange.

TELE WIDE

MENU/EXIT

ENTER

POWER

LAMP

TEMP

MENU/EXIT ENTERMENU/EXITENTER

POWER	Blinking in green	POWER	Lighting in green
	LAMP		LAMP
	TEMP		TEMP

Power can not be turned “ON” or “OFF”.

2 Press POWER () button.

•It may take about one minute for the lamp to come on.

•On rare occasions, the lamp may fail to come on. At this time, turn on the lamp again after a few minutes.

POWER button SOURCE button

POWER ON/OFF
	SOURCE
C1	C2		DVI
			D
COMP1	COMP2		DVI-D
S		V	DVI
			A
S-VIDEO	VIDEO		DVI-A
16:9	4:3		ZM
16:9	4:3		ZOOM
REAL			DYN
REAL	ASPECT		DYNAMIC
	2	3
1
	ENTER
MENU			EXIT
CNT	BRI	COL	TIN
CONTRAST BRIGHT		COLOR	TINT
TEM	GAM	SH
COLOR	GAMMA SHARPNESS

TEMP

LIGHT

3 Select an input signal.

•Press one of SOURCE buttons (VIDEO, S-VIDEO, COMPONENT 1, COMPONENT 2, DVI-DIGITAL, or DVI-ANALOG button) ac- cording to the connected input terminal.

•Select the input signal after video image is projected on the screen.

•With this projector, the input signal is selected from the input sig- nal sources contained in the signal setting menu. (See Page 26 for the details.)

•Picture images of some input signals may not be projected on the proper position of the screen. On this occasion, execute “AUTO” in the signal setting menu of the setting menu. (See Page 30.)

4Set the projector after adjusting the projec- tion distance to obtain specified image frame size.

5Set the projector and screen so that they may face perpendicular to each other. (See

Page 11.)

•If the projector and the screen can not be made perpendicular to each other, adjust the projection angle. (See Page 11.)

6. Adjust size of the projected image by turn- ing the zoom ring.

•It is possible to change image size by varying the distance from the projector to the screen.