Toshiba TDP-MT500 owner manual Air exhaust, Use

Page 7

IMPORTANT SAFETY INSTRUCTIONS

21.Do not leave thermal-paper documents or easily deformed items on top of the unit or near

the air exhaust.

The heat from the unit could erase the information on the thermal paper, or cause deformation or warping.

Also, when you touch a metal object put near the air exhaust, a burn may be caused.

22.Unplug the power plug after the projector is finished to

use.

Turn off POWER button to bring the pro- jector into its standby state with the light- source lamp off. Then, wait about 2 min- utes and turn off the main power switch, and be sure to unplug the power plug for safety.Wait about 2 minutes in standby state, because during this time the intake/exhaust fan is operating to cool down the light-source lamp. Turn- ing off the main power switch or unplug- ging the power plug immediately after use may bring the projector into failure.

Image 7

Contents TDP-MT500 Safety Precautions Power Sources Ventilation Important Safety InstructionsSource of Light Water and Moisture Power-Cord ProtectionCleaning HeatAttachments AccessoriesObject and Liquid Entry Do not place the product verti- callySafety Check Damage Requiring ServiceReplacement Parts ServiceUse Air exhaustSave Original Packing Materials Power Supply Cord SelectionImportant Precautions Place and Manner of InstallationDeclaration of Conformity Avoid Volatile LiquidTable of Contents Inserting the dry batteries into the remote controller Checking accessoriesPreparation Zoom ring 18 Name and function of operational parts of the projectorName and function of operational parts of remote controller How to use remote controllerOn the picture quality adjusting buttons Vertical directions Operational range of remote controller Front of projectorAdjusting projection angle Setting UPSetting up screen Basic setupScreen size and Projection distance Where the screen size is 16Wide Height H Where the screen size is 4Viewing Video Images Viewing Video Images Connecting to video equipment that has DVI-D terminalConnection Plugging power cordMaking projection Press Power buttonSelect an input signal Adjust focus by turning the focus ringTurn OFF the main power switch Turn to indication O Press Power button againIf the projected image frame is deformed to a trapezoid How to change the settings On setting Aspect Image angleViwing Computer Images Connecting this projector with a computerTor port of the computer Power button / Power indicator Turn on the main power switch Turn to indicationPress Power button again Menu construction Setting with MenusHow to make menu setting Picture Menu Items that can be set with menusProfessional Picture Menu Video On the memory for projected image qualityComponent 1 DVI-ANALOG/DIGITAL Color Thickness Adjusting projected imagesAdjusting color Color Thickness and Tint Setting projected images sharper or softer SharpnessUSER1 USER2 Setting with Menus How to replace the lamp Replacing the Lamp / Cleaning the ProjectorCleaning the projector Cleaning dust in the intake ventCleaning the lens Picture images are not projected on screen TroubleshootingTroubleshooting Remark IndicatorsPower Lamp Temp State StateDimensional drawings for references When Asking Installation WorkTDP-MT500 TerminalsXGA Type of connectable signalsVGA Svga