VIEWING VIDEO IMAGES
C. Making projection
Preparations:
•Remove the lens cap.
•Turn on power for the connected video equipment.
Main power switch
Focus ring
Zoom ring
TELE 
WIDE
MENU/EXIT |
| ENTER |
POWER |
| POWER button / |
| LAMP | POWER indicator |
| TEMP |
POWER button | POWER ON/OFF |
|
| |
| SOURCE |
| ||
SOURCE button | C1 | C2 | DVI | |
S | V |
| A | |
|
|
|
| D |
| COMP1 | COMP2 | ||
|
|
|
| DVI |
| VIDEO | |||
| 16:9 | 4:3 | ZM | |
| 16:9 | 4:3 | ZOOM | |
| REAL |
|
| DYN |
| REAL | ASPECT DYNAMIC | ||
|
| 2 | 3 |
|
| 1 |
|
|
|
|
| ENTER |
| |
| MENU |
|
| EXIT |
| CNT | BRI | COL | TIN |
| CONTRAST BRIGHT | COLOR | TINT | |
| TEM | GAM | SH |
|
| COLOR | GAMMA SHARPNESS |
| |
TEMP
LIGHT
LIGHT
1 Turn “ON” the main power switch (Turn to indication I).
•When the main power switch is MENU/EXIT 
ENTER
turned on, POWER indicator comes POWER on in orange.
•If the projector finished operation without sufficient cooling, the following operation of the main power button may not work during the time when the cooling fan is turning. (At this time POWER indicator blinks in orange.) After the fan has stopped turning, press the power button again to turn on the indicator in orange.
MENU/EXIT 
ENTERMENU/EXITENTER
POWER | Blinking in green | POWER | Lighting in green |
| LAMP |
| LAMP |
| TEMP |
| TEMP |
Power can not be turned “ON” or “OFF”.
2 Press POWER (
) button.
•It may take about one minute for the lamp to come on.
•On rare occasions, the lamp may fail to come on. At this time, turn on the lamp again after a few minutes.
3 Select an input signal.
•Press one of SOURCE buttons (VIDEO,
•Select the input signal after video image is projected on the screen.
•With this projector, the input signal is selected from the input sig- nal sources contained in the signal setting menu. (See Page 26 for the details.)
•Some projected picture images may be made easy to see by chang- ing ASPECT (image angle). (See Page 20 for the details.)
4Set the projector after adjusting the projec- tion distance to obtain specified image frame size.
5Set the projector and screen so that they may face perpendicular to each other. (See
Page 11.)
•If the projector and the screen can not be made perpendicular to each other, adjust the projection angle. (See Page 11.)
6. Adjust size of the projected image by turn- ing the zoom ring.
•It is possible to change image size by varying the distance from the projector to the screen.
7. Adjust focus by turning the focus ring.
21