VIEWING COMPUTER IMAGES
Main power switch
TELE 
WIDE
MENU/EXIT 
ENTER
POWER |
| POWER button/ |
| LAMP | POWER indicator |
| TEMP |
|
POWER ON/OFF |
|
| |
POWER button | SOURCE |
| |
C1 | C2 | DVI | |
|
|
| D |
COMP1 | COMP2 | ||
S |
| V | DVI |
|
|
| A |
VIDEO | |||
16:9 | 4:3 | ZM | |
16:9 | 4:3 | ZOOM | |
REAL |
|
| DYN |
REAL | ASPECT | DYNAMIC | |
| 2 | 3 |
|
1 |
|
|
|
| ENTER |
| |
MENU |
|
| EXIT |
CNT | BRI | COL | TIN |
CONTRAST BRIGHT | COLOR | TINT | |
TEM | GAM | SH |
|
COLOR | GAMMA SHARPNESS | ||
TEMP
LIGHT
LIGHT
When stopping projection:
8 Press POWER (
) button.
•A confirmation message appears on the screen.
•To cancel this state, wait for a while, or press EXIT but- ton or MENU button of the remote controller, or press MENU/EXIT button of the projector.
9 Press POWER (
) button again.
•The
10 Wait about 2 minutes until POWER indicator comes on in orange.
•Wait about 2 minutes in standby state, because during this time the intake/exhaust fan is turning to cool down the
•The intake/exhaust fan continues to turn for about one minute after POWER indicator has come on in orange.
•Do not turn off the main power switch while POWER in- dicator is blinking. If the main power switch is turned off immediately after use, the projector may fall in failure.
•The fan generates a loud sound while cooling down, but it is not a failure.
11 Turn “OFF” the main power switch (Turn to indication O).
•When the projector is not used for a long time, unplug the power plug from the power outlet for safety.
•Set the lens cap to prevent dust from being gathered from outside.
When the projector is connected to a
Example of setup for the external output:
Press “Fn” key and any of “F1” to “F12” key (Depends on the type of the computer).
26