Toshiba B-570-QQ owner manual Batch type, Strip type

Page 16

6. LOADING THE MEDIA

EM1-33035

6. LOADING THE MEDIA

10. The media is now loaded and the sensor position is set.

Batch type:

Media

Fig. 6-9

NOTE: Set the selection switch to the STANDARD/STRIP position. Improper setting can affect the print quality.

Strip type:

1Remove enough labels from the leading edge media to leave 500 mm of backing paper exposed.

2Wind the backing paper onto the take-up spool and fix in position with the take-up clip. (Wind the paper counter clockwise around the spool as this is the direction it rotates.)

3Rotate the take-up spool anti-clockwise a few times to take up any slack in the backing paper.

 

Media

 

Take-up Spool

Front Plate

Take-up Clip

Black Screw

 

(HAA-0004001)

Backing Paper

 

Fig. 6-10

NOTES: 1. The backing paper is easier to feed back to the take-up spool if the front plate is removed.

2.When fitting the tace-up clip the longer side of the clip should be fitted into the shallow groove on the take-up spool.

3.Set the selection switch to the STANDARD/STRIP position.

6-5

Image 16
Contents QQ Series Energy Star is a U.S. registered mark Safety Summary Precautions Request Regarding MaintenanceTable of Contents Accessories IntroductionApplicable Model 7 2 Q QPrinter SpecificationsOption Media RibbonFront/Rear View OverviewOperation Panel DIP Switch Functions Turn the Power OFF before switching the functionsInstalling the Printer Connecting the Power Cord and CablesCentronics Interface 36 pins, Male Expansion I/O Interface 24 pins, MaleLoading the Media Groove Ridge Removing the paper holders upper plates from the media guide An easy way to set the black mark sensor position Batch type Strip typeBuilt-in rewinder type Loading the Ribbon Inserting the Optional Flash Memory Card STI-FL/4ACARE/HANDLING of the Media and Ribbon General Maintenance CleaningCovers and Panels Removing Jammed PaperCleaning the Cutter Unit Threshold Setting Threshold setting procedureAuto Ribbon Saving Mode Troubleshooting Error Message Problem SolutionHead Error Restaert keyProblem Solution