11. TROUBLESHOOTING
11. TROUBLESHOOTING
Error Message | Problem | Solution |
|
|
|
EXCESS HEAD | The print head is too hot. | Turn the power off and decrease the |
TEMP |
| print head temperature. |
|
|
|
HEAD ERROR | This message is displayed when | 1. Restart the printing by pressing the |
| sending the head broken check | [RESTAERT] key. |
| command ([ESC] HD001 [LF] [NUL]) | 2. Replace the print head. |
| and the print head has a broken |
|
| element. |
|
|
|
|
RIBBON ERROR | There is a fault with the ribbon sensor. | Turn the power off. Contact your |
**** |
| Authorized Service representative. |
|
|
|
CUTTER ERROR | Media is jammed in the cutter. | Remove the jammed media and feed |
**** |
| the undamaged media through the |
|
| cutter. |
|
| ➔ Press the [RESTART] key. |
|
| Else |
|
| Turn the power off and contact your |
|
| Authorized Service representative. |
|
|
|
FLASH WRITE | An error has occurred when loading | 1. Turn the power off, |
ERROR | data onto a flash memory card. | memory card and try again. |
|
| 2. Replace the flash memory card and |
|
| retry. |
|
| 3. Turn the power off and contact your |
|
| Authorized Service representative. |
|
|
|
FORMAT ER- | An error has occurred while formatting | 1. Turn the power off, |
ROR | a flash memory card. | memory card and try again. |
|
| 2. Replace the flash memory card and |
|
| retry. |
|
| 3. Turn the power off and contact your |
|
| Authorized Service representative. |
|
|
|
FLASH MEMORY | No more data can be saved in the | Replace the card with a new one and |
FULL | flash memory card. | |
|
| (Only 1MB and 4MB cards can be |
|
| used.) |
|
|
|
COMMUNICATION | A communication error has occurred | Turn the power off then on again or |
ERROR | with the host. | press the [RESTART] key. |
|
| Check the program data. |
|
| ➔ Call your Authorized Service repre- |
|
| sentative if necessary. |
|
|
|