Siemens M1 manual ATSn? Read an S-register, EnterATS0?S7?, ATSn=x Write to an S-register, ATS0=3

Technical reference section

ATSn? - Read an S-register

The ATSn? command allows you to read the "n"-th S-register. Parameter "n" must be an integer and designate an S-register.

Example:

Enter:ATS0?

GSM module: 003

OK

Enter:ATS0?S7?

GSM module: 003 030 OK

In response to the ATSn? command, the GSM module displays the register contents as a three-digit decimal number. If more than one register is read on one command line, the GSM module displays the register contents in the order in which the registers ap- pear in the command string. The GSM module transmits a <CR> and <LF> character after each set of register contents is displayed. If the command syntax is incorrect, the GSM module returns ERROR.

ATSn=x - Write to an S-register

The ATSn=x command allows you to instruct your GSM module to store the value "x" in register "n". "n" and "x" must be integers and decimal numbers.

•n must designate an S-register.

•x must be from "0" to "255".

Example:
Enter:	ATS0=3
GSM module:	OK

This command sets register S0 to the value "3", i.e. the GSM module automatically an- swers a call after 3 ringing signals. The GSM module acknowledges the command with OK to indicate that the command was executed and a new command can be pro- cessed.

62