Siemens PCIL43 manual Pixel, Remove module bracket, Reset, Restart, Restore CD, Scsi port

Page 103

Glossary

Pixel

PixElement (picture point). The pixel represents the smallest element that can be reproduced on-screen or on a printer.

PROFIBUS / MPI

Process Field Bus (standard bus system for process applications)

RAM

The RAM is the total a read/write memory in a PG/PC.

Recovery CD

Contains the tools for setting up the hard disks and the Windows operating system.

Remove module bracket

The module bracket is used to fasten modules and ensure safe contact and transport. Shocks and vibrations especially affect large, heavy modules. It is therefore recommended to use the module bracket for this type of module. There are also short, compact and light modules on the market. The module bracket was not designed for these modules because the standard fastening is sufficient for them.

Reset

Hardware Reset: Reset/restart of the PC using a button/switch.

Restart

Warm start of a computer in operate state without switching off the power supply (Ctrl + Alt + Del).

Restore CD

The Restore CD is used to restore the system partition or the entire hard disk to factory state if the system has crashed. The bootable CD contains all the necessary image files. You can also create a boot disk allowing restoration via the network.

ROM

Read-Only Memory ROM is read-only memory in which every memory location can be addressed individually. They contain factory set programs and data that are not lost in the event of a power failure.

SCSI port

Small Computer System Interface Interface for connecting SCSI devices (e.g. hard disk or CD–ROM drives)

SIMATIC Rack PC IL 43	Glossary-7
Operating Instructions, Edition 09/2005, A5E00432875-01

Image 103

Contents Operating Instructions Edition 09/2005 SimaticPage Operating Instructions Edition 09/2005 Industrial PC Rack PC ILSafety Guidelines Table of contents 10-1 Glossary Glossary-1 Table of contents Preface IntroductionGuide for the operating instructions Contents format Table of ContentsSystem expansions Safety informationGeneral safety instructions RepairsESD guidelines BatteryOverview DescriptionHighlights Areas of applicationHighlights General features FeaturesFunction Standard versions Optional accessoriesInterfaces Monitoring functionsDVD ROM Optional accessories Disk drivesOptional expansions Rear view of the device Pos Description DesignExternal structure Front view of the device Pos DescriptionOperator control on/off button Pos Description Operator controlsPos Name Description Connecting elementsInterfaces Layout of the interfaces on the rear of the deviceStatus displays Display Meaning Power supplyPosition of the IEC power plug Description Status displaysDescription 3.6 Design Unpacking the device Deployment planningTransport Unpacking and checking the delivery unitDevice equipment Noting the device identification dataAmbient and environmental conditions Deployment planning Ambient and environmental conditions Possible mounting methods InstallationInstalling the device Possible areas of installationInstallation Installing the device Connecting peripherals ConnectingTo be noted before you connect the device Connecting the device to powerSteps for connecting the device to mains ConnectingLocalized information Steps in securing the power plug Secure the power plugCommissioning Basic commissioning initial power-upPrerequisites for commissioning Burner/DVD player software Switch off the deviceBurner software DVD burnerSATA1 RAID Software Sata interface Installation locationRemovable hard disks Replacing a hard disk4MS08NVV RAID systemFunctions for RAID system management Replace faulty drive in RAID system Comments about faultsSide panel Associate new hard drive Commissioning Ethernet IntegrationFurther information Integration Overview of the following monitoring functions Temperature monitoring/displayTemperature monitoring FunctionsFan monitoring Watchdog WDFunction Preparation Expansions and configurationOpen the device ToolsSteps for opening the enclosure cover Open the deviceSteps for opening the device front Memory expansion Installing expansion cardsMemory expansion options Installing expansion modules Installing an expansion moduleSteps for installing an expansion module Pos Description Installing disk drivesOptions of installing disk drives Installing and removing a disk drive or removable rackSteps for removing the drive carrier module Removing the drive carrier moduleSteps for installing a disk drive Installing and removing a hard diskDisk drive or removable disk rack installation Installing a disk driveCarrying out repairs Maintenance and serviceRemoving and installing hardware components RepairsDisposal Replacing the backup batteryTo be noted before you replace the battery Replacing the battery Reconfiguring the Bios SetupRemoving the power supply module Removing the power supply moduleHow to remove the power supply module Removing the motherboard How to remove the motherboardRemoving the motherboard Steps Remove filter and device fanPreparing for equipment fan exchange Remove filter and fanRemoving the processor Processor replacementInstalling the fan How to remove the processor11-7 Restore DVD Reinstalling the softwareGeneral installation procedure Recovery CDBooting with the CD Recovery Installing WindowsRestoring the factory state Setting up partitions Setting up the partitions for Windows operating systemsFormat primary partition Installing Microsoft Windows operating systemsSetting up the language selection for Windows 2000 MUI Setting up the language selection for Windows 2000 MUIInstalling drivers and software Maintenance and service Reinstalling the software General problems TroubleshootingProblem Possible cause To correct or avoid error Problems when using modules of third-party manufacturers Safety Technical data13.1 General specifications General technical dataMotherboard Special FeaturesClimatic Conditions Mech. Ambient conditionsCOM1 GraphicsStatus displays LEDs CertificationsOutput voltage Power requirements of components maximum valuesAC voltage supply Standard systemTechnical data of the telescopic rails Dimensional drawing of the device Dimensional drawingsDimensional drawing for the use of telescopic rails Dimensional drawing for the use of telescopic railsMotherboard Detailed descriptionsSystem resources Tab Option Setting Bios SetupGuidelines and declarations Certification for the USA, Canada and Australia Certificates and approvalsDIN ISO 9001 certificate Software License AgreementEMC Technical Support Service and supportFurther support Training centerService & Support on the Internet Retrofitting instructions Figure A-1 For the temperature range 5 to 35 CWhat does ESD mean? ESD GuidelinesFigure B-1 Electrostatic voltages on an operator Electrical chargeAbbreviation Term Definition AbbreviationsCOA CGACLK CmosEMM FAQEide EisaIrda IDEIEC IgbtPIC PataPCI PcmciaSelv SataScsi SdramWWW VRMWAV WlanAbbreviations Glossary Configuration software Boot disketteBooting Configuration filesDrivers Device configurationController Disc-at-onceHub FormattingGender changer Hard disksLicense key diskette IT networksLegacy USB support License keyPacket writing PasswordMotherboard Operating systemRemove module bracket ResetRestore CD PixelSession at once Setup Bios SetupTroubleshooting Serial interfaceWlan WindowsGlossary-10 CD-R / CD-RW IndexIndex Index VGA Page Siemens AG