Siemens PCIL43 manual Battery, ESD guidelines

Safety information

2.1 General safety instructions

Battery

This device is equipped with a Lithium battery. Batteries may only be replaced by qualified personnel.

Caution

There is the risk of an explosion if the battery is not replaced as directed. Replace only with the same type or with an equivalent type recommended by the manufacturer. Dispose of used batteries in accordance with local regulations.

Warning

Risk of explosion and release of harmful substances!

Therefore, do not throw Lithium batteries into an open fire, do not solder or open the cell body, do not short-circuit or reverse polarity, do not heat up above 100° C, dispose as regulated and protected against direct exposure to sunlight, humidity and dewing.

ESD guidelines

Modules containing electrostatically sensitive devices (ESDs) can be identified by the following label:

Strictly follow the guidelines mentioned below when handling modules which are sensitive to ESD:

•Always discharge your body´s static electricity before handling modules which are sensitive to ESD (for example, by touching a grounded object).

•All devices and tools must be free of static charge.

•Always pull the power plug and disconnect the battery before you install or remove modules which are sensitive to ESD.

•Handle modules fitted with ESDs by their edges only.

•Do not touch any wiring posts or conductors on modules containing ESDs.

2-2	SIMATIC Rack PC IL 43
	Operating Instructions, Edition 09/2005, A5E00432875-01