Siemens PCIL43 manual Graphics, COM1

Page 73

Technical data 13.1 General specifications

General technical data

max. permissible power consumption PCIe x1 slot

max. permissible power consumption PCIe x16 slot

Max. admissible power consumption per PCI slot

Max. accumulated power dissipation per PCI slot

PCI modules with exclusively 5V supply

Max. accumulated power dissipation of all slots

PCIe x1 modules: 3.3V 3A, 12V 2.1A; 3.3Vaux 0.4A

PCIe x16 modules: 3.3V 3A, 12V 2.1A; 3.3Vaux 0.4A

5V 5A or 3.3V 7A, 12V 0.5 A, -12V 0.05 A

Accumulated power dissipation (all voltages) may not exceed 25 W.

The total consumption of all modules may not exceed 25W

Accumulated power of 80 W may not be exceeded

Disk drives (For configuration details, refer to the order documentation)

Floppy disk

3.5" (1.44 MB)

Hard disk

3.5" SATA 150, 120 GB

DVD ROM

5.25" ATAPI

 

Read:

 

DVD ROM: Single layer 16x, Dual Layer 8x

 

DVD+R/RW, DVD-R/RW 8x, DVD-RAM 2x

 

CD-ROM, CD-R 32x, CD-RW 20x

DVD ROM/CD RW

5.25” ATAPI

 

Read:

 

DVD-ROM: Single Layer 16x, Dual Layer 8x

 

DVD-R/-RW/+R/+RW 8x

 

CD-ROM 52x, CD-R/RW 32x

 

Writing:

 

CD-R 52x, CD-RW 32x

DVD burner

5.25" ATAPI

 

Read:

 

DVD-ROM: Single Layer 16x, Dual Layer 12x

 

DVD-R/+R: Single Layer 16x, Dual Layer 7x

 

DVD-RW/+RW 13x

 

CD-ROM/CD-R 48x, CD-RW 40x

 

Writing:

 

DVD+R 16x, DVD+RW 8x, DVD-R 16x, DVD-RW 6x,

 

DVD+R9 (DL) 8x, DVD-R DL 6x

 

CD-R 48x, CD-RW 32x

Graphics

 

Graphic controller

Intel® GMA950 graphics controller,

 

chipset integrated 2-D and 3-D engine,

 

up to 2048 x 1536 at 75 Hz

Graphic controller memory

Dynamic Video Memory Technology

Resolutions/frequencies/colors

up to 800 x 600 at 120 Hz / 32-bit color depth

 

up to 1280 x 1024 at 100 Hz / 32-bit color depth

 

up to 2048 x 1536 at 75 Hz / 16-bit color depth

Interfaces

 

COM1

Serial port 1 (V.24), 9-pin Cannon connector

COM2 (optional)

Serial port 2 (V.24), 9-pin Cannon connector

LPT1

Parallel port (Standard, EPP and ECP mode)

 

Connection for parallel port printer

SIMATIC Rack PC IL 43

13-3

Operating Instructions, Edition 09/2005, A5E00432875-01

Image 73
Contents Operating Instructions Edition 09/2005 SimaticPage Operating Instructions Edition 09/2005 Industrial PC Rack PC ILSafety Guidelines Table of contents 10-1 Glossary Glossary-1 Table of contents Preface IntroductionGuide for the operating instructions Contents format Table of ContentsGeneral safety instructions Safety informationRepairs System expansionsESD guidelines BatteryOverview DescriptionHighlights Areas of applicationHighlights General features FeaturesFunction Interfaces Optional accessoriesMonitoring functions Standard versionsDVD ROM Optional accessories Disk drivesOptional expansions External structure DesignFront view of the device Pos Description Rear view of the device Pos DescriptionOperator control on/off button Pos Description Operator controlsInterfaces Connecting elementsLayout of the interfaces on the rear of the device Pos Name DescriptionPosition of the IEC power plug Description Power supplyStatus displays Status displays Display MeaningDescription 3.6 Design Transport Deployment planningUnpacking and checking the delivery unit Unpacking the deviceDevice equipment Noting the device identification dataAmbient and environmental conditions Deployment planning Ambient and environmental conditions Installing the device InstallationPossible areas of installation Possible mounting methodsInstallation Installing the device Connecting peripherals ConnectingTo be noted before you connect the device Connecting the device to powerSteps for connecting the device to mains ConnectingLocalized information Steps in securing the power plug Secure the power plugCommissioning Basic commissioning initial power-upPrerequisites for commissioning Burner/DVD player software Switch off the deviceBurner software DVD burnerRemovable hard disks RAID Software Sata interface Installation locationReplacing a hard disk SATA14MS08NVV RAID systemFunctions for RAID system management Replace faulty drive in RAID system Comments about faultsSide panel Associate new hard drive Commissioning Ethernet IntegrationFurther information Integration Temperature monitoring Temperature monitoring/displayFunctions Overview of the following monitoring functionsFan monitoring Watchdog WDFunction Open the device Expansions and configurationTools PreparationSteps for opening the enclosure cover Open the deviceSteps for opening the device front Memory expansion Installing expansion cardsMemory expansion options Installing expansion modules Installing an expansion moduleSteps for installing an expansion module Options of installing disk drives Installing disk drivesInstalling and removing a disk drive or removable rack Pos DescriptionSteps for removing the drive carrier module Removing the drive carrier moduleDisk drive or removable disk rack installation Installing and removing a hard diskInstalling a disk drive Steps for installing a disk driveRemoving and installing hardware components Maintenance and serviceRepairs Carrying out repairsTo be noted before you replace the battery Replacing the backup batteryReplacing the battery Reconfiguring the Bios Setup DisposalRemoving the power supply module Removing the power supply moduleHow to remove the power supply module Removing the motherboard How to remove the motherboardRemoving the motherboard Preparing for equipment fan exchange Remove filter and device fanRemove filter and fan StepsInstalling the fan Processor replacementHow to remove the processor Removing the processor11-7 General installation procedure Reinstalling the softwareRecovery CD Restore DVDBooting with the CD Recovery Installing WindowsRestoring the factory state Setting up partitions Setting up the partitions for Windows operating systemsFormat primary partition Installing Microsoft Windows operating systemsSetting up the language selection for Windows 2000 MUI Setting up the language selection for Windows 2000 MUIInstalling drivers and software Maintenance and service Reinstalling the software General problems TroubleshootingProblem Possible cause To correct or avoid error Problems when using modules of third-party manufacturers 13.1 General specifications Technical dataGeneral technical data SafetyClimatic Conditions Special FeaturesMech. Ambient conditions MotherboardCOM1 GraphicsStatus displays LEDs CertificationsAC voltage supply Power requirements of components maximum valuesStandard system Output voltageTechnical data of the telescopic rails Dimensional drawing of the device Dimensional drawingsDimensional drawing for the use of telescopic rails Dimensional drawing for the use of telescopic railsMotherboard Detailed descriptionsSystem resources Tab Option Setting Bios SetupGuidelines and declarations DIN ISO 9001 certificate Certificates and approvalsSoftware License Agreement Certification for the USA, Canada and AustraliaEMC Further support Service and supportTraining center Technical SupportService & Support on the Internet Retrofitting instructions Figure A-1 For the temperature range 5 to 35 CWhat does ESD mean? ESD GuidelinesFigure B-1 Electrostatic voltages on an operator Electrical chargeAbbreviation Term Definition AbbreviationsCLK CGACmos COAEide FAQEisa EMMIEC IDEIgbt IrdaPCI PataPcmcia PICScsi SataSdram SelvWAV VRMWlan WWWAbbreviations Glossary Booting Boot disketteConfiguration files Configuration softwareController Device configurationDisc-at-once DriversGender changer FormattingHard disks HubLegacy USB support IT networksLicense key License key disketteMotherboard PasswordOperating system Packet writingRestore CD ResetPixel Remove module bracketTroubleshooting Setup Bios SetupSerial interface Session at onceWlan WindowsGlossary-10 CD-R / CD-RW IndexIndex Index VGA Page Siemens AG